MVI56-PDPMV1 Profibus DP V1 compatible module

For most applications, the installation and configuration steps described in this article work without additional programming.

ProSoft Technology recommends that you complete the steps in this chapter before developing custom applications.
Successfully network with the processor and PROFIBUS after verifying that the module is installed and communicating.
1.1 System Requirements
The MVI56-PDPMV1 module requires the following minimum hardware and software components:
• Rockwell Automation ControlLogix processor with compatible power supply

There is a free slot in the rack for the MVI56-PDPMV1 module. The module requires 800ma of available power. Rockwell

Automation RSLogix 5000 Programming software version 2.51 or higher
• Rockwell Automation RSLinx communications software
 Pentium ®
II minimum 450mhz. Pentium III 733 MHz(or higher)

Recommended operating systems:
o Microsoft Windows XP Professional with Service Pack 1 or 2
o Microsoft Windows 2000 Professional(with Service Pack 1, 2 or 3)
o Microsoft Windows Server 2003
• Minimum 128mb of RAM, 256mb of RAM is recommended