1756-PB75 ControlLogix Power module

Description

[Product description] :1756-PB75 ControlLogix Power module

Manufacturer : A-B

Product model :1756-PB75

Product type:1756-PB75 ControlLogix Power module

[details] 1756-PB75 ControlLogix Power module

The 1756-PB75 is the standard ControlLogix power supply. The power module is a DC power module. It is used to provide power for the midplane and enable modules. The power supply is installed on the far left side of the specific ControlLogix case.

The 1756-PB75 is compatible with most ControlLogix cases, especially the B and C Series 1756-A4, 1756-A7, 1756-A10, 1756-A13, 1756-A17 cases. When connecting an input power supply to this power supply, the recommended wire size is 2.5 mm2 or 14 American Wire gauge (AWG) solid or stranded copper wire with an insulation rating of 90°C(194°F) or higher and a maximum insulation thickness of 1.2 mm (3/64 in).) Tighten the screw with 0.565 nm (5 lb. In.) torque. The power supply has a physical dimension of 14.0 H x 11.2 W x 14.5 cm (5.51 x 4.41 x 5.71 in) and weighs 0.95 kg (2.10 lb).

The 1756-PB75 is externally powered by a nominal supply voltage of 24VDC, and the applicable voltage range is 18-32VDC. It has a rated input power of 95W and a rated surge current of 30A. It’s at 0… + 60 ° C (+ 32… +140°F) output power is 75 W, current capacity is 1.5 A at 1.2VDC; 4A is 3.3 volts DC; It is 13 A for 5.1 volts DC and 2.8 A for 24 volts DC. The power supply also has a retention time of 35 ms at 18V DC; 40 ms @ 24V DC and 40 ms @ 32V DC, isolation voltage of 250V(continuous), reinforced insulated type, backplane type power input test for 60 seconds at 3500V DC

It is part of the 1756 ControlLogix product line and also powers the back of the case. The 1756-PB75 has an input voltage range of 18 to 32V DC, a nominal DC of 24V, a rated power of 95W input and 75W maximum output, and a temperature range of 0 to 60°c. The module has a maximum surge current of 30A and a signal hold time of 35ms at 18V DC, 40ms at 24V DC, and 40ms at 32V DC. Its current capacity is 1.5A at 1.2V, 4A at 3.3V, 13A at 5.1V, and 2.8A at 24V DC. The isolation voltage of the 1756-PB75 is 250V, with reinforced insulation type, tested at 3500V DC for 60 seconds between power input and backplane. Its circuitry uses 2.5 mm2 (14 AWG) stranded or solid copper wire with a conductor screw torque of 0.8 N-m (7 lb-inches). The 1756-PB75 has specified T4 ATEX, IEC, and North American temperature codes and comes with an open housing. It has a functional temperature range of 0-60°C(32-140°F) at relative humidity of 5-95% without condensation. The 1756-PB75 has an operating shock rating of 30 grams and can withstand 2.0 grams of operating vibration at 10-500 Hz. It weighs about 0.95 kg (2.10 lb) and has a shipping size of 14.0 cm x 11.2cm x 14.5cm (5.51 in x 4.41in x 5.71in).

This article is from the official website of Zhangzhou Branch of Xiamen Xiongba E-commerce Co., LTD. Please attach this link:www.sauldcs.com

[contact information]

Sales Manager: Sunny

QQ:3095989363

Mobile phone/wechat number: +86-18059884797

Email :sales@xiongbagk.cn

[main business] 1756-PB75 ControlLogix Power module

AB, ABB, Bentley Nevada, ICS TRIPLEX, Honeywell, Schneider, Bahaman, Triconex, Siemens, Yokogawa Electric, Woodward, Emerson, Ebao, Foxboro, etc. New famous brand DCS system parts, PLC and discontinued parts, a large number of hot inventory advantage and distribution of imported industrial control parts brand, if you want to know the price or other more information, please contact us below.

[catalogue main business]

[available for immediate delivery] 1756-PB75 ControlLogix Power module

[Disclaimer]

Zhangzhou Branch of Xiamen Xiongba E-commerce Co., LTD. We sell new products and discontinued products, independent channels to buy such special products. Xiamen Xiongba Electronic Commerce Co., LTD. Zhangzhou Branch is not an authorized distributor, distributor or representative of the featured products on this website. All product names/product images, trademarks, brands and logos used on this website are the property of their respective owners. Descriptions, descriptions or sales of products bearing these names, images, trademarks, brands and logos are for identification purposes only and do not imply any association or authorization with any rights holder.

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com