Description

DS200LPPAG1AAA line protection panel

Product Description

The DS200LPPAG1AAA is a line protection panel manufactured by General Electric (GE) in the Mark V series. This board is designed to protect electrical lines, prevent electrical failures such as overload and short circuit, and ensure the safe and stable operation of the power system. Here are some of the key features and parameters of the product:

Input voltage: Can handle 200-600 VAC system input voltage.

Jumpers: There are seven jumpers on the board, identified as JP1 to JP7.

Terminal block: Contains two terminal blocks, and each terminal block has three entities.

Test points: The board also contains test points for diagnostics and testing.

Mounting: The board is mounted on the bracket of another component of the drive.

Signal line: The signal line connected to the board originates from another component.

Diagnostic tool: If you suspect that the board is not working properly, you can use the diagnostic tool included with the drive to generate success and component health reports.

DS200LPPAG1AAA line protection panel is widely used in industrial, energy, transportation, construction and other fields of electrical systems, especially in the need to protect, measure and control the function of the corresponding spacing of the power station. It ensures the stable operation of the power system by providing a variety of protection functions, such as quick break protection, limited speed break protection, overcurrent protection, etc.

In addition, the DS200LPPAG1AAA line protection panel adopts modular design and has a variety of protection functions, which can display the working status of the electrical line in real time through the indicator light and display screen on the panel, which is convenient for users to understand the operation of the line. At the same time, the product also provides a wealth of interfaces and connection methods, easy to integrate and connect with other electrical equipment.

DS200LPPAG1AAA

Product parameter

Manufacturer: General Electric
Series: Mark V
Product Type: Line Protection Panel Board
System input voltage: 200-600 VAC
Group revision: G1
Function abbreviation/abbreviation: LPPA
Jumpers: 7 jumpers, identified as JP1 to JP7
Terminal block: Two terminal blocks. Each terminal block has three terminals
Test points: Contains test points for diagnostics
Mount: Mount on the bracket of the other component of the drive
Size: Usually 33.0 cm x 17.8 cm
Repair time: 3-7 days
Stock status: In stock
Country of origin: USA
Manual: GEI-100178

Application field

DS200LPPAG1AAA is a line protection panel in the GE Mark V series, which is mainly used to monitor, control and protect electrical lines, prevent electrical faults such as overload and short circuit, and ensure the safe and stable operation of the power system. It has a variety of protection functions, such as quick break protection, limited speed break, overcurrent protection, reclosing, overload, zero sequence overcurrent, low frequency load shedding, low voltage, bus grounding, PT line breaking, etc. These functions are designed to ensure the stable operation of the power system and prevent system failures caused by voltage instability or other potential hazards.

DS200LPPAG1AAA line protection panel adopts modular design and has a variety of protection functions. It can display the working status of the electrical line in real time through the indicator light and display screen on the panel, which is convenient for users to understand the operation of the line. At the same time, the product also provides a wealth of interfaces and connection methods, easy to integrate and connect with other electrical equipment.

The application areas of this product are very wide, including but not limited to the following aspects:

Power plant: Used to protect generators, transformers and other power equipment.

Industrial drives: Power systems used to protect industrial equipment such as large motors and fans.

Petroleum energy: Ensure the stable operation of the power system during the extraction, transmission and processing of petroleum.

Turbine systems: Provide line protection in wind power generation and other turbine control systems.

Substations: In high-voltage transmission lines and substations, used to connect and control the input and output signals of transmission equipment.

Industrial automation: In the industrial field, especially in the industrial automation process involving power control, used to connect and control the input and output signals of various power equipment and industrial processes.

Other related product recommendations：

MVI56-ADM Prosoft Programmable Application Development Module

BMXCPS2010 Schneider Standard power module

BMXDDO6402K Schneider discrete DC output module

BMXDDI3202K Schneider discrete input module

PCI-6221 779066-01 Multifunction I/O Device

SHC68-68-EPM NI Multifunctional cable

05701-A-0361 Backplane Serial communication controllers and monitors

AI03 ABB AI module 2-3-4 Wire RTDs

AI02J ABB AI module 2-3-4 Wire RTDs

IOC-555-D 17-550555-001 GE Electronic components

PC834-001-T PACIFIC SCIENTIFIC Brushless Servo Drive

8440-1666 B SPM-D11/LSXR features 12/24 VDC power supply

IC670ALG310 GE voltage-source analog output module

PM866K01 3BSE050198R1 AC800M processor unit

81001-340-71-R Allen Bradley Inverter processing module

PXI-8423 NI PXI-8423/2 RS-485 Interface

AD02 ABB AI module 2-3-4 Wire RTDs

MVME55006E-0163 MOTOROLA VMEbus Single-Board Computer

531X301DCCAFG2 GE DRIVE CONTROL BOARD

A6370D Emerson A6370 Overspeed Protection Monitor

1715-TASOB8DE Allen Bradley termination assembly

4PP065.0571-X74F Power Panel PP65

2094-BC02-M02 Kinetix 6000 Integrated Axis Module (IAM)

MVI56E-MCM ControlLogix series communication module

1769-L32E CompactLogix Modular controller

DI810 16 Digital Input module

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com