3300/55/01-01-13-13-00-00-01-00 3300 XL NSv Proximity Transducer System

It is primarily used in the following applications on fluid-filmed bearing machines where a small shaft or reduced side-view is present:
l Radial vibration and radial position measurements
l Axial (thrust) position measurements
l Tachometer and zero speed measurements
l Phase reference (Keyphasor signals)
The 3300 XL NSv Transducer System design allows it to replace both the 3300 RAM Transducer Systems and the 3000-series or 7000-series 190 Transducer System. Upgrades from the 3300 RAM system to the 3300 XL NSv system may use the existing probe, extension cable, and monitoring

system with 3300 XL NSv Proximitor Sensor. Upgrades from the 3000-series or 7000-series Transducer System must replace the probe, extension cable, and Proximitor Sensor with NSv components.
The 3300 XL NSv Transducer System has an Average Scale Factor of 7.87 V/mm (200 mV/mil), which is the most common output for eddy current transducers. Its enhanced sideview and small target characteristics give it a shorter linear range than the Bently Nevada 3300 XL-series 5 and 8 mm Transducer System.
The 1.5 mm (60 mils) of linear range exceeds the linear range of the 3000-series 190 Transducer System.