DS200LDCCH1ALA GE
General Electric manufactured the DS200LDCCH1ALA board as a driver control and local area network (LAN) communication card. The card was developed as a member of the Mark V series driver board. All drives of the Directo-Matic 2000 series have this card installed in their drive cabinet. The board provides a range of functions such as device, motor and I/O control functions. The drive control and LAN communication board features four microprocessors to filter card signals. The digital and analog I/O sent to the board is received and filtered by the onboard Drive Control processor (DCP). The LAN system that feeds the converter is filtered through an on-board LAN control processor (LCP). The remaining two processors, the Motor Control Processor (MCP) and the Cooperative Motor Processor (CMP), work cooperatively with each other. MCP provides the initial processing space for digital I/O communication. If the computation required by the signal exceeds the spatial capacity provided by the MCP, the CMP will supplement the processing capacity. The board is equipped with a connected alphanumeric keyboard. Products purchased through AX Control will be shipped in antistatic protective plastic bags. Remove the circuit board only after reviewing all installation parameters provided by the manufacturer. For complete instructions on DS200LDCCH1ALA BOARD wiring and installation, refer to the series manual and DEVICE DATASHEET. Members of the Mark V series, including this drive control LAN communication card, are supported by General Electric.
Local Area Network (LAN) is a computer communication Network that connects all kinds of computers, external devices and databases in a Local geographical range (such as a school, a factory and an office). It can be connected with remote LAN, database or processing center through data communication network or special data circuit, and constitute a large-scale information processing system.