The DS200TBCBG1AAA is a General Electric Mark V terminal analog board. AX Control has more than one such board in stock; Since every letter in the board identification ID is important, be sure to order the right board for your particular system. The Mark V Speedtronic system is used to control and maintain gas and steam industrial turbine systems of all sizes and complexities.

DS200TBCBG1AAA terminal simulation card is a long and narrow board. It has a long wiring terminal on one of the board edges, as well as several vertical pin connectors. The board also has a jumper switch and a resistance network array. This is one of three strips used in the MKV system to receive isolated 21 volt DC excitation power input.

DS200TBCBG1AAA

The jumper on the DS200TBCBG1AAA determines whether the input is used as a voltage input or a current input. In current input mode, the voltage is connected internally in parallel to the TCQA boards in <r1> and <r3>.</r3></r1> The current input on the board may be 4-20 mA (14) or choose between 4-20 mA or 1 mA. (8). The GE manual contains in-depth information about jumper selection and configuration.