DS200TBQBG1A has 4 termination signals. The DS200TBQBG1A has pulse rate input, the DS200TBQBG1A has compressor emission transmitter, the DS200TBQBG1A has DC voltage input, and the DS200TBQBG1A has vibration sensor.
The BJ1 to BJ4 jumpers of the DS200TBQBG1A are used to fan out the pressure sensor #1 input signal in older applications. Jumpers BJ5 to BJ7 on DS200TBQBG1A are used to connect BJ1 to BJ4. These jumpers on the DS200TBQBG1A install a load resistor to the pressure sensor #1 input signal, making the signal milliamps rather than voltage signals. The jumper BJ8 to BJ15 on the DS200TBQBG1A configures the analog input to the current or voltage on the DS200TBQBG1A.