1MRS050729 Ethernet gateway

Description

Technical specification
1, Ethernet gateway, support Modbus-TCP protocol
2, electrical isolation, strong anti-noise ability
3 Support the standard Modbus TCP communication protocol
4, all Delta industrial automation products can be connected to the Ethernet network
5. Email warning function
Smart Monitoring 6.
7, web monitoring function

1MRS050729

Enable Count signal: The count signal must be enabled. This depends on the mode of operation through the terminal or through the input EN (enabled) of the function block. · Set the counter to the starting value: The counter can be set to the starting value. This value must be displayed at the input STA (start value) of the function block. Using the setting signal (which depends on the mode of operation input via the terminal or with the setting of the function block), the value of the word variable at STA is written to the counter. Note: If SET and EN signals are present in several processing cycles, the processor resets the counter at the end of each program. During the rest of the processing cycle, the counter accounts for the number of pulses. Read counter contents: The current counter contents (actual value) can always be read at the OUT output (actual value output) of the function block. Configure the counter number: there are several modes of operation in which two counters can work independently of each other. Only in this case is the function block used twice in the program.

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com