中文版
Description
The installation of the tension sensor is divided into two types, the first is to
use the bearing seat fixed with a bolt hole to fix the bearing seat on the base. The other is to use
the optional plate fixed bearing
When installing the method, it is important to pay attention to the causes of inaccurate tension
measurement, when the tension sensing device is connected to the signal line, the switching
quantity and the output terminal are weak and pure
3BHB007445P0001
Try to stay away from strong wires, so as not to interfere with electromagnetic signals on tension
detection. In practical application, the output sensitivity, temperature compensation range, zero
temperature shadow direction, rated load, limit conformity and other factors are also
the reasons that affect the inaccurate tension measurement. Precautions for use:
1. The screws for installing the tension detector and bearing seat should not be too long,
which will cause the reed of the tension detector to fail to work properly and no tension can be detected.
2. When using side fixing, the fixing screws should not be too long, otherwise it will cause damage
to the measuring mechanism in the tension detector.
3. The tension detector should not be strongly impacted or harmed at any time, otherwise it will cause
damage to the tension detector.
Please contact Sunny sales@xiongbagk.cn for the best price.
➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com
