NTCL01 INFI-Net Communication Link TU

Description

NTCL01 INFI-Net Communication Link TU

Product Description

The NTCL01 terminates the connection of the INFI-NET ® or Plant Loop communication loops to the Network Interface Slave Module (INNIS01) or the Loop Interface Module (INLIM03). The NTCL01 is designed to connect to communication loops of either twinaxial or coaxial cable.
This manual explains how to install and use the NTCL01. It explains how to set the jumpers, install the cables, mount the termination unit and lists maximum cable lengths for the communication loop.

The Communication Termination Unit (NTCL01) provides a termination point for a Network Interface Slave Module (INNIS01) or a Loop Interface Module (INLIM03). The TCL gives the option of using twinaxial or coaxial cable to connect the NIS to the INFI-NET communication network or the LIM to Plant Loop. Jumper settings on the TCL select the type communication cable. Figure 1-1 shows an example of the NTCL01 within a PCU on the INFI-NET communication network.

Technicians should read the manual before installing and operating the TCL. Do not put the TCL into operation until you read and understand this instruction.

The TCL attaches to a Field Termination Panel (NFTP01), inside the INFI 90® cabinet, with two mounting screws and one ground screw. It is a printed circuit board that consists of:
• Terminal strips
• BNC connectors
• Electronic components
• Jumpers
• Fuse

NTCL01

Product parameter

Application field

The application fields of NTCL01 are mainly reflected in industrial automation and control systems, which can be summarized as follows:

Industrial automation control: NTCL01, as a control technology or module, has long occupied an important position in the field of industrial automation control. It can provide safe, reliable and relatively complete solutions to meet the current needs of industrial enterprises for automation.
Motors and motor drives: NTCL01 is used to drive actuators for linear or rotational motion, particularly in the Rexroth motor and motor product range. These motors and motor products include high-performance AC servo motors, economical AC servo motors and DC servo motors for motion control needs in different scenarios.
Vibration monitoring and control: NTCL01 as DCS network interface terminal board, can be applied to turbine, compressor, fan, water pump, coal mill, gear box, motor and other large and medium-sized rotating machinery vibration monitoring. This vibration monitoring technology is widely used in steel, electric power, metallurgy, chemical, petrochemical and other industries.
Distributed modular process I/O system: NTCL01, as part of the S800 I/O system, communicates with the parent controller via a standard fieldbus. Due to its extensive connectivity, NTCL01 can be adapted to a wide range of process controllers from ABB and other vendors to enable the construction of distributed modular process I/O systems.
Control system expansion: NTCL01 can also be used for control system expansion, such as distributed expansion in combination with interface modules DC505-FBP/DC551-CS31. These modules can be plugged directly into the base plate of the TU5xx series, and the measurement signal range of each channel can be set individually.
To sum up, NTCL01 has a wide range of applications in industrial automation, motors and motor drives, vibration monitoring and control, distributed modular process I/O systems, and control system expansion. Its reliability and efficiency make it an integral part of industrial automation and control systems.

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com