PR6423/10R-030-CN EPRO Channel receiver new

BRAND/ MANUFACTURER:EPRO

MANUFACTURER PART NUMBER:PR6423/10R-030-CN

ADDITIONAL INFORMATION: Module

CONDITION: Brand New Factory Sealed – Original

AVAILABILITY: 1

WARRANTY: 12 Months

ESTIMATED WEIGHT: 1 kg

COUNTRY OF ORIGIN: US

SHIPPING: Worldwide by DHL /Fedex /TNT / UPS

Category:

Description

To order:Email below sales@xiongbagk,cn

【Manager: Sunny】

【Mobile: +86 18059884797】

【Whatsapp/ Wechat/Skype: +86 18059884797 】

PR6423/10R-030-CN The two families of sensors are available in several basic models and are widely used in many fields of industrial measurement. Rugged construction allows installation in hazardous environments. It can be used in all kinds of turbo machinery, fan, compressor, gear box, water pump, coal research machine, etc. The sensors PR6423/10R-030-CN  are especially suitable for high temperature environments. This sensor has three different sensitivities, depending on the type of measuring amplifier. The high output and low impedance of the measuring coil make the sensor have strong anti-interference. It can be directly connected with epro MMS3000 and MMS6000 turbine monitoring and protection systems.

The shielding problem of 1 meter joint of eddy current sensor

Some eddy current sensors are equipped with a 1-meter connector for easy installation, as shown in the figure below. There is a metal tube about 10 cm in length and 1 cm in diameter 1 meter away from the probe in the sensor armored cable. The metal tube can be unscrewed from the middle, and it can be seen that the sensor cable is connected with a LEMO connector. The shell of the LEMO connector is the COM end of the sensor signal. Because the cable armored or metal tube may be in contact with the field conductor such as the cylinder block, if the shell of the LEMO connector is in contact with the metal tube, it may occur that the COM end of the sensor and the field conductor short-circuit, thus interfering signals, and in serious cases, even lead to protection action jump machine. Therefore, the LEMO connector must be insulated with the heat shrink sleeve (provided with the sensor) to ensure that the LEMO connector is insulated from the metal pipe and cable armor.

PR6423/10R-030-CN EPRO Channel receiver new

 

PR6423/101-101 CON031PR6423/10R-010PR6423/10R-010 CON021PR6423/10R-030 CON021PR6423/10R-030-CN CON021PR6423/10R-040 CON021PR6424/000-000 CON021PR6424/000-000 CON21PR6424/000-010 CON021PR6424/000-030PR6424/000-030 CON021PR6424/000-040 CON021PR6424/000-040 CON21PR6424/006-010PR6424/006-030PR6424/010-000 CON011PR6424/010-010 CON021PR6424/012-000 CON011PR6424/012-000 CON011PR6424/012-010 CON011PR6424/012-010 CON011

PR6426/000-030 CON021PR6426/010-010PR6426/010-010 CON021PR6426/010-030 CON021PR9268/017-100PR9268/200-000PR9268/201-000PR9268/202-100PR9268/300-000PR9268/301-000PR9268/301-000PR9268/302-000PR9350/02PR9376/010-011PR96424/010-000 CON011SKP289-3SKP326-2SKP326-2 MPU PCBUES815SUES815S-24AR

 

 

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com