135489-01 3500/42M I/O module

135489-01 is I/O module of 3500/45. 3500/45 Position Monitoris a 4-channel instrument that accepts input from proximity transducers, Rotary Position Transducers (RPTs), DC Linear Variable Differential Transformers (DC LVDTs), AC Linear Variable Differential Transformers (AC LVDTs), and rotary potentiometers. The monitor conditions the input and compares the conditioned signals with userprogrammable alarms. Protects machinery by continuously comparing monitored parameters against configured alarm setpoints to drive alarms.
Category:

Description

135489-01 is I/O module of 3500/45. 3500/45 Position Monitoris a 4-channel instrument that accepts input from proximity transducers, Rotary Position Transducers (RPTs), DC Linear Variable Differential Transformers (DC LVDTs), AC Linear Variable Differential Transformers (AC LVDTs), and rotary potentiometers. The monitor conditions the input and compares the conditioned signals with userprogrammable alarms. Protects machinery by continuously comparing monitored parameters against configured alarm setpoints to drive alarms.

Communicates essential machine information to both operations and maintenance personnel. The 3500/42M Proximitor Seismic Monitor is a four-channel monitor that accepts input from proximity and seismic transducers. It conditions the signal to provide vibration and position measurements and compares the conditioned signals with user-programmable alarms.

The 3500 Power Supplies accept a wide range of input voltages and converts them to voltages acceptable for use by other 3500 modules. Three Power Supply versions are available with the 3500 Series Machinery Protection System as follows: 1. ac Power Supply, 2. High Voltage dc Power Supply 3. Low Voltage dc Power Supply.

The 16 Channel Relay Module is a full height module that provides 16 relay outputs. You can place any number of Channel Relay Module Transient Data Interface Modules in any slot on the 16 right. Each output of the 16 channel relay module can be independently programmed to perform voting logic. Each relay of the module contains alarm drive logic. The programming of alarm drive logic uses AND and or logic and can use the following contents: n Alarm input (alarm and danger state) is not good. n separate measurement variables from any monitoring channel or any combination of monitor channels in the rack. You can use the 3500 rack to program and configure the alarm drive. The n16 Channel Relay Module requires a 3500 rack configuration, version 3.3 or later. The 16 channel relay module requires 350O data acquisition software, version 2.40 or higher. The 16 Channel Relay Module requires 3500 data display software, version=1.40 or later. N Certification option when ordered in multiples (2), 3500 monitors are certified to Zone 2 standards, including ATEX and North America. The standard of n2 area stipulates to increase the spacing requirements under higher voltage. The 16 channel relay module does not meet these spacing requirements. Therefore, module approval options ordered with multiples are limited to the lower

Voltage ratio of those with other approved options. N The use of higher voltages violates the hazardous area certificate multiple approval option associated with the following. The North American Part 2 standard and the CSA only approval associated option (- O1) have been downgraded to 30Vrms to meet the 61010-1 type test requirements. N If the 16 channel relay module is a functional safety (SIL) system, the functional safety certificate requires a limited voltage. Higher voltages will not be allowed for functional safety (SIL) systems.

BENTLY

These accelerometers are used for key mechanical casing acceleration measurement applications such as gear engagement monitoring. The 330400 is designed to meet the requirements of American Petroleum Corporation Accelerometer Institute Standard 670. It provides an amplitude range of 50g peak and a sensitivity of 100mV/g. 330425 is the same, but it provides a larger amplitude range (75g peak) and a sensitivity of 25mV/g. If the machine is protected by enclosure measurements taken as a whole, the usefulness of the measurements for each application should be considered. The most common machine failures (unbalance, misalignment,, etc.) originate in the rotor and cause an increase (or at least a change).

In order for any housing to be measured separately to effectively protect the whole machine, a large amount of rotor vibration must be faithfully transmitted to the bearing housing or machine housing, or more specifically, installed to the sensor. In addition, pay attention to the installation of body sensors. The improper installation of the transducer may cause performance degradation, and/or generate signals that do not represent the actual machine. Vibration output and speed integration may deteriorate. If integrated into speed, for high-quality speed measurement, the 330500 should use a Velomitor sensor. On request, we can provide assistance in determining the suitability of housing measurements for machines with problems and/or installations

Contact Us

Email: sales@xiongbagk.cn

Tel: + 86-18059884797

Whatsapp:+86-18059884797

Website: www.sauldcs.com

Address:Unit 2009, 20th Floor, 1733 Lvling Road, Siming District, Xiamen

Shipment: EMS,DHL,UPS & FEDEX

Payment: T/T

Supply Ability: 30 Unit/Units per Month

Price: The more you order ,the lower price you will get

Delivery: In stock,within 3 days send the products

Packing

Bently Nevada 3500/05 rack 129,766-01

Bently Nevada 3500/06 weatherproof enclosure 129766-01

Bently Nevada 3500/08 Diagnostic Access Panel 136275-01

Bently Nevada 3500/15 Power Supply 129767-01

Bently Nevada 3500/20 Rack Interface Module 129768-01

Bently Nevada 3500/22m Data Interface 161580-01

Bently Nevada 3500/25 Keyphasor? Module 129770-01

Bently Nevada 3500/32 4-Channel Relay Module 129771-01

Bently Nevada 3500/33 16 Channel Relay Module 162291-01

Bently Nevada 3500/34 TMR Relay Module 129771-01

Bently Nevada 3500/40M Proximitor? Monitor 143488-01

Bently Nevada 3500/42M Prox/Seismic Monitor 143489-01

Bently Nevada 3500/44M Air Monitor 143,490-01

Bently Nevada 3500/45 Position Monitor 135545-01

Bently Nevada 3500/46m Hydropower Monitor 144403-01

Bently Nevada 3500/50 Tachometer Module 134938-01

Bently Nevada 3500/53 speed protection system 134939-01

Bently Nevada 3500/60 and 3500/61 Temperature Monitors 134542-01

Bently Nevada 3500/77M Cylinder Pressure Monitor 146282-01

Bentley Nevada 3500/62 Variable Process Monitor 136973-01

Bently Nevada 3500/63 Hazardous Gas Monitor 166,848-01

Bently Nevada 3500/64 m Dynamic Pressure Monitor 142836-01

Bentley Nevada 3500/70M Recip Pulse/Speed 166226-01

Bently Nevada 3500/72M Rod Position Monitor 146479-01

Bently Nevada 3500/91 EGD Communication Gateway Module User’s Guide 161232-01

Bently Nevada 3500/91 EGD Gateway Protocol Configuration Guide 167060-01

Bentelita neva 3500/92 communication gateway 138629-01

Bently Nevada 3500/93 System Display 137412-01

Bently Nevada 3500/94 VGA Display 148636-01

Bently Nevada 3500/95 Integrated PC Display 145169-01

149986-01 Bently Nevada modular 3500/93 Bently Nevada Differential expansion module
138607-01 Bently Nevada Preamplifier 3500/20 Bently Nevada Overspeed detection module
176449-01 Bently Nevada Cable 3500/25 Bently Nevada Dorsal card
163179-01 3500/60 Bently Nevada Other sensors 330180-X1-05 BENTLY Monitor Module
133388-02 Bently Nevada Vibration monitor 330130-085-00-05 BENTLY Tachometer module
125712-01 Bently Nevada Vibration monitor 330130-040-00-00 BENTLY Shell expansion monitor
125744-02 Bently Nevada Vibration monitor 330101-00-25-10-02-00 BENTLY Monitoring module
176449-02 Bently Nevada monitor BENTLY 3500/32 Eddy current axial displacement sensor
127610-01 Bently Nevada Probe sensor BENTLY 3500/33 Keyphasor Module
133388-01 Bently Nevada Power back panel BENTLY 1900/55 Frame interface monitoring module
149369-01 Bently Nevada 16 Channel Relay Module BENTLY 3500/33 Vibration sensor
136180-01 Bently Nevada Relay output backplane BENTLY 149992-01 Transient Data Interface Module
330850-90-05 Bently Nevada sensor BENTLY 3500/60 Backplane
330980-51-05 Bently Nevada Temperature monitor BENTLY 125768-01 3500/20 Frame system series module
125680-01 Bently Nevada Eddy current probe BENTLY 3500/20 Communication gateway module
125760-01 Bently Nevada amplifier BENTLY 125840-01 3500/15 Vibration transmitter
138708-01 Bently Nevada Relay module BENTLY 135489-03 3500/42M PLC module

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com