中文版
Description
- Manufacturer : Bently Nevada
- Product No. : 135489-04
- Product type : I/O Module With Internal Barriers And Internal Terminations
- Made in U.S.A
- Weight : 0.201 Kg
- Shipping weight : 2 Kg
- Half-Height Modules
- 3500 Series Rack Can Contain One or Two Power Supplies
- (3) Versions Manufactured
The GE / Bently Nevada 3500/15 Series Power Supplies are half-height modules and must be installed in the specially designed slots on the left side of the rack. The 3500 rack can contain one or two power supplies (any combination of ac and/or dc) and either supply can power a full rack. If installed, the second supply acts as a backup for the primary supply. When two power supplies are installed in a rack, the supply in the lower slot acts as the primary supply and the supply in the upper slot acts as the backup supply. Removing or inserting either power supply module will not disrupt operation of the rack as long as a second power supply is installed.
The 3500 Power Supplies accept a wide range of input voltages and converts them to voltages acceptable for use by other 3500 modules. Three Power Supply versions are available with the 3500 Series Machinery Protection System as follows: 1. ac Power Supply, 2. High Voltage dc Power Supply 3. Low Voltage dc Power Supply.
BENTLY
These accelerometers are used for key mechanical casing acceleration measurement applications such as gear engagement monitoring. The 330400 is designed to meet the requirements of American Petroleum Corporation Accelerometer Institute Standard 670. It provides an amplitude range of 50g peak and a sensitivity of 100mV/g. 330425 is the same, but it provides a larger amplitude range (75g peak) and a sensitivity of 25mV/g. If the machine is protected by enclosure measurements taken as a whole, the usefulness of the measurements for each application should be considered. The most common machine failures (unbalance, misalignment,, etc.) originate in the rotor and cause an increase (or at least a change).
In order for any housing to be measured separately to effectively protect the whole machine, a large amount of rotor vibration must be faithfully transmitted to the bearing housing or machine housing, or more specifically, installed to the sensor. In addition, pay attention to the installation of body sensors. The improper installation of the transducer may cause performance degradation, and/or generate signals that do not represent the actual machine. Vibration output and speed integration may deteriorate. If integrated into speed, for high-quality speed measurement, the 330500 should use a Velomitor sensor. On request, we can provide assistance in determining the suitability of housing measurements for machines with problems and/or installations
Contact Us
Email: sales@xiongbagk.cn
Tel: + 86-18059884797
Whatsapp:+86-18059884797
Website: www.sauldcs.com
Address:Unit 2009, 20th Floor, 1733 Lvling Road, Siming District, Xiamen
Shipment: EMS,DHL,UPS & FEDEX
Payment: T/T
Supply Ability: 30 Unit/Units per Month
Price: The more you order ,the lower price you will get
Delivery: In stock,within 3 days send the products
Packing
Bently Nevada 3500/05 rack 129,766-01
Bently Nevada 3500/06 weatherproof enclosure 129766-01
Bently Nevada 3500/08 Diagnostic Access Panel 136275-01
Bently Nevada 3500/15 Power Supply 129767-01
Bently Nevada 3500/20 Rack Interface Module 129768-01
Bently Nevada 3500/22m Data Interface 161580-01
Bently Nevada 3500/25 Keyphasor? Module 129770-01
Bently Nevada 3500/32 4-Channel Relay Module 129771-01
Bently Nevada 3500/33 16 Channel Relay Module 162291-01
Bently Nevada 3500/34 TMR Relay Module 129771-01
Bently Nevada 3500/40M Proximitor? Monitor 143488-01
Bently Nevada 3500/42M Prox/Seismic Monitor 143489-01
Bently Nevada 3500/44M Air Monitor 143,490-01
Bently Nevada 3500/45 Position Monitor 135545-01
Bently Nevada 3500/46m Hydropower Monitor 144403-01
Bently Nevada 3500/50 Tachometer Module 134938-01
Bently Nevada 3500/53 speed protection system 134939-01
Bently Nevada 3500/60 and 3500/61 Temperature Monitors 134542-01
Bently Nevada 3500/77M Cylinder Pressure Monitor 146282-01
Bentley Nevada 3500/62 Variable Process Monitor 136973-01
Bently Nevada 3500/63 Hazardous Gas Monitor 166,848-01
Bently Nevada 3500/64 m Dynamic Pressure Monitor 142836-01
Bentley Nevada 3500/70M Recip Pulse/Speed 166226-01
Bently Nevada 3500/72M Rod Position Monitor 146479-01
Bently Nevada 3500/91 EGD Communication Gateway Module User’s Guide 161232-01
Bently Nevada 3500/91 EGD Gateway Protocol Configuration Guide 167060-01
Bentelita neva 3500/92 communication gateway 138629-01
Bently Nevada 3500/93 System Display 137412-01
Bently Nevada 3500/94 VGA Display 148636-01
Bently Nevada 3500/95 Integrated PC Display 145169-01
| 149986-01 Bently Nevada | modular | 3500/93 Bently Nevada | Differential expansion module |
| 138607-01 Bently Nevada | Preamplifier | 3500/20 Bently Nevada | Overspeed detection module |
| 176449-01 Bently Nevada | Cable | 3500/25 Bently Nevada | Dorsal card |
| 163179-01 3500/60 Bently Nevada | Other sensors | 330180-X1-05 BENTLY | Monitor Module |
| 133388-02 Bently Nevada | Vibration monitor | 330130-085-00-05 BENTLY | Tachometer module |
| 125712-01 Bently Nevada | Vibration monitor | 330130-040-00-00 BENTLY | Shell expansion monitor |
| 125744-02 Bently Nevada | Vibration monitor | 330101-00-25-10-02-00 BENTLY | Monitoring module |
| 176449-02 Bently Nevada | monitor | BENTLY 3500/32 | Eddy current axial displacement sensor |
| 127610-01 Bently Nevada | Probe sensor | BENTLY 3500/33 | Keyphasor Module |
| 133388-01 Bently Nevada | Power back panel | BENTLY 1900/55 | Frame interface monitoring module |
| 149369-01 Bently Nevada | 16 Channel Relay Module | BENTLY 3500/33 | Vibration sensor |
| 136180-01 Bently Nevada | Relay output backplane | BENTLY 149992-01 | Transient Data Interface Module |
| 330850-90-05 Bently Nevada | sensor | BENTLY 3500/60 | Backplane |
| 330980-51-05 Bently Nevada | Temperature monitor | BENTLY 125768-01 3500/20 | Frame system series module |
| 125680-01 Bently Nevada | Eddy current probe | BENTLY 3500/20 | Communication gateway module |
| 125760-01 Bently Nevada | amplifier | BENTLY 125840-01 3500/15 | Vibration transmitter |
| 138708-01 Bently Nevada | Relay module | BENTLY 135489-03 3500/42M | PLC module |
Please contact Sunny sales@xiongbagk.cn for the best price.
➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com
