3500/22M 138607-01 Transient Data interface module

Product details:

3500/22M 138607-01 Transient data interface module belongs to the 3500 series
Operating temperature :-30 to +65 degrees Celsius
Storage temperature :-40 to +85 degrees Celsius
Humidity :95%, non-condensing
Unpowered TDI: 12 years -50C
Protocol :BN host.
Baud rate: Max. 115.2 kV baud
Availability: In stock
Country of Manufacture: USA (USA)

138607-01 is a transient data interface module developed by Bentley Nevada Corporation. It belongs to the 3500 series of components. Transient Data Interface (TDI) Connects the 3500 monitoring System to GE’s System 1 mechanical management software. TDI combines the capabilities of 3500/20 RIM with the data collection capabilities of communications processors such as TDXnet.
Configure keylock
Used to set 3500 units to run or program mode. Run mode allows normal tube rack operation but prevents configuration changes.
PROGAM mode allows normal rack operation as well as local or remote rack configuration.
The key can be removed from the rack at any location to keep the switch running or programmed. Locking the switch in the running position prevents unauthorized rack reconfiguration. The rack can be remotely reconfigured at any time while the switch is locked in the program position.

Front panel LED
Normal LED: Indicates when 3500/22M is operating normally
TX/RX LED: Indicates when the 3500/22M is communicating with other modules in the rack.
TM LED: Indicates when 3500 racks are in stroke doubling mode.
Normal LED configuration: indicates that the 3500 frame has a valid configuration.
Alarm data collection
Before and after the alarm.
Collect 1 second static data 10 minutes before the event and 1 minute after the event.
Static values of 100 milliseconds are collected 20 seconds before the event and 10 seconds after the event.
Waveform data of 2.5 minutes shall be collected every 10 seconds before the alarm, and waveform data of 1 minute shall be collected every 10 seconds after the alarm