8AC120.60-1 B&R encoder interface

Product details:

Material No. :
8AC120.60-1
Description:
EnDat 2.1 Encoder interface for installation on ACOPOS servo drives
Encoder monitoring
Also suitable for evaluating simple incremental encoders with sinusoidal input signals
ACOPOS plug-in module, EnDat encoder and sine increment encoder interface

8AC120.60-1

According to the design, the copying screw 6 can be used with different lead, the larger the lead, the faster the hydraulic cylinder can be moved within a certain precision range (several hundred ~ thousand mm/s). When the copying screw uses a small lead, the motion speed of the hydraulic cylinder will be reduced, but the position accuracy will be very high (micron/step). In a word, the motor will open the valve port for a small displacement (for example: 5 microns), and the high pressure oil will push the piston to move the corresponding distance and close the valve port at the same time, and the piston will stop. If this process is circulated 1000 times, the hydraulic cylinder piston can move 5mm. If it is circulated 1000 times in 1 second, then the hydraulic cylinder will achieve a speed of 5mm/second. This principle is also often encountered in our daily life, such as the steering hydraulic assist device in the car.