KJ3002X1-BC1  DeltaV Analog Input Card

Input type:
The module has 4 differential, bipolar current/voltage inputs. Each channel can be configured for voltage or current input.
Current input characteristics:
The current input can withstand unexpected maximum normal mode 30 V DC connections.
In order to protect the current input circuit from dangerous input levels, the module is equipped with a 250-ohm electrofluometric resistor with a resistance rating of about 5 watts. Note, however, that this protection is temporary and only protects one channel at a time.

Add to quote
Category:

Description

KJ3002X1-BC1  DeltaV Analog Input Card

Product description

Input type:
The module has 4 differential, bipolar current/voltage inputs. Each channel can be configured for voltage or current input.
Current input characteristics:
The current input can withstand unexpected maximum normal mode 30 V DC connections.
In order to protect the current input circuit from dangerous input levels, the module is equipped with a 250-ohm electrofluometric resistor with a resistance rating of about 5 watts. Note, however, that this protection is temporary and only protects one channel at a time.
Power and Isolation:
There is no current limit on the transmitter power terminal.
All four channels are isolated from the module bus.
The power supply to the input stage is converted from 24 V on the module bus.
Extended features:
The module distributes external transmitter power to each channel, which adds a simple connection (extended MTU) for distributing power to the external 2-wire transmitter.
Applications:
Due to its flexible input configuration and isolation characteristics, the KJ3002X1-BC1 is suitable for a variety of industrial automation and control applications.
Brand and compatibility:
The KJ3002X1-BC1 is an EMERSON brand product and may be compatible with PLCS and control systems from Emerson or other manufacturers.

Product parameter

♦ Support CompactLogix processor version 16 or later 1769 I/O bus performance (MicroLogix 1500 not supported)
♦ Additional instructions create UDTs that provide I/O logic, status, and control data
♦ Support AOP files, improve CompactLogix system integration
♦ Diagnostic data can be seen in the controller label, through which you can judge whether the module is working properly
♦ Configuration file saved in the CompactLogix project (ACD file)
♦ The module acts as a PLC coprocessor to reduce PLC scanning time
♦ Support up to 10,000 words of data
♦ Up to 20 client and 20 server connections are supported simultaneously
♦ Support Enron and Daniel floating point data
♦ Suitable for SCADA and field device interface applications

Application field

KJ3002X1-BC1 analog input module has a wide range of application scenarios in industrial automation and control systems. The following are the main application scenarios:

Turbomachinery protection system: with the speed measuring gear plate, the shaft speed can be measured, and through the perfect waveform output at high resolution and low speed, the precise control and protection of turbomachinery can be achieved. This module can also be combined with other measurement modules to form a complete turbomachinery protection system.
Axis eccentricity measurement: If the dual-channel axis eccentricity measurement module MMS6220 is used with the eddy current sensor, the relative radial axis eccentricity signal can be measured, and the eccentricity peak value and the maximum/minimum distance between the sensor and the measured object can be measured. This is crucial for turbomachinery (such as steam engines, gas engines, water turbines, etc.) that requires precise control of the axis position.
Vibration measurement: Analog input card RTD (e.g. PR9268/201-000*) can be used with vibration sensors to measure frequencies in the 10… 1000Hz and 4… 1000Hz mechanical vibration. This sensor can measure the vibration of large amplitude (peak-to-peak up to 3mm) and provide a voltage signal proportional to the vibration speed. This module can play an important role in the vibration monitoring of turbine machinery, fans, compressors, gear boxes, water pumps, coal mills and other equipment.
In addition, the KJ3002X1-BC1 analog input module can also be used in a variety of applications requiring high-precision analog inputs, such as temperature measurement, pressure measurement, flow measurement, etc. Its rugged construction allows installation in hazardous environments, improving system reliability and stability.

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com

Related products