A06B-6220-H045#H600 B SERVO AMPLIF IER @* series

The products in this manual are controlled based on Japan’s “Foreign Exchange and
Foreign Trade Law”. The export from Japan may be subject to an export license by the
government of Japan.
Further, re-export to another country may be subject to the license of the government of
the country from where the product is re-exported. Furthermore, the product may also be
controlled by re-export regulations of the United States government.
Should you wish to export or re-export these products, please contact FANUC for advice.

In this manual we have tried as much as possible to describe all the various matters.
However, we cannot describe all the matters which must not be done, or which cannot be
done, because there are so many possibilities.
Therefore, matters which are not especially described as possible in this manual should be
regarded as ”impossible”.

A06B-6058-H011A06B-6058-H011

General Safety Precautions
– When an abnormality such as an alarm or a hardware failure occurs, the operations
described in the specifications are not guaranteed unless otherwise specifically noted.
When action corresponding to the abnormality is specifically described, take the action.
When no action is described, please contact FANUC.
– The signals and functions described in the specifications cannot be used separately for
safety functions unless otherwise described as being usable for the safety functions.
Their specifications are not assumed to be used as the safety functions in this case, an
unexpected danger may be caused. For information about the safety functions, please
contact FANUC.
Generally, the safety functions represent functions that protect the operators from
machine danger.
– A wrong device connection or setting can lead to unpredictable operation. When
starting to operate the machine for the first time after assembling the machine, replacing
components, or modifying parameter settings, exercise the greater care by, for example,
reducing the torque limit value, error detection level, or operating speed or by operating
the machine in such a way that an emergency stop can be made quickly