中文版
Description
Manufacturer GE General Electric
Series Mark V
Part Number DS200SIOBH1ABA
Product Type VME Stand I/O Card
The GE I/O Control Board DS200SIOBH1ABA features twenty jumpers and 3 switch blocks with 6 switches in
each block for a total of 18 switches. It is also populated with one LED and one 40-pin connector. The jumpers
on the GE I/O Control Board DS200SIOBH1ABA on the original board come with the jumpers set for the factory
defaults. Before you install the board you can review the information in the printed material to learn about the alt
ernate settings for the jumpers and how they change the operation of the board. Some of the jumpers only have o
ne supported position and so cannot be changed.
DS200SIOBH1ABA
When you find that the board must be replaced, the best practice is to set the jumpers in the new board to matc
h the jumper positions on the old board. In this way the board will act the same and support the drive performan
ce. First remove the old board by removing the screws that hold it in the board rack and use two hands to remov
e the board from the drive. Use care to keep the board from hitting the other components in the drive. Find a clean
and dry surface nearby and flatten out a static protective bag. Place the old board on the bag. Open the sealed pro
tective bag that contains the replacement board and slid out the board. Carry it with two hands and place it next t
o the old board. Set the switches to match the switch positions on the old board.
Please contact Sunny sales@xiongbagk.cn for the best price.
➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com
