中文版
Description
The GE Power Distribution Board DS200TCPDG2BEC features 8 toggle switches, 36 fuses, and 4 signal wire terminals. It also has 36 OK LEDs and 1 10-pin connector. The GE Power Distribution Board DS200TCPDG2BEC is populated with black plastic housings for 36 fuses. The fuses are situated in a vertical position in the canisters and are easy to access and replace when needed. To replace a fuse on the board, twist the top of the canister to open it. The top remains attached to the canister for ease of use. Use your thumb and one finger to remove the fuse from the canister. It is best practice to discard the blown fuse so that is isn’t inserted into a canister again on the board accidently. To install a new fuse, align the fuse with the opening and drop it into the canister. Either end of the fuse can be dropped into the canister. Place the top on the canister and twist it to close it.
DS200TCPDG2BEC
To determine that a fuse is blown and needs replacing consider that a visual inspection of the fuse is not possible because the fuse is inside the canister. However, each fuse has an LED next to it that indicates that the fuse is OK. When lit, the green LED indicates the element in the fuse is intact and working to protect the board circuit. When off, the fuses is blown or the board is not receiving power. If all the LEDs are off, you might suspect that the board is not receiving power.
Please contact Sunny sales@xiongbagk.cn for the best price.
➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com
