中文版
Description
The IC693CPU363 is manufactured by GE Fanuc. This module is a controller from the Series 90-30 of Programmable Logic Controllers (PLC). This controller is responsible for executing the user program stored within its user memory as well as managed communication exchanges between compatible devices such as programming workstations, Human Machine Interface (HMI), Supervisory Control and Data Acquisition (SCADA), Databases and other 3rd party hardware and devices.
The IC693CPU363 features a 80386EX processor with clock speed of 25 MHz and typical scan rate of 0.22 ms per 1K of logic for Boolean contacts. The embedded memory of this controller amounts to 240KB which is internally partitioned to accommodate different registers and internal functions. It has Two (2) serial ports, One (1) port having a physical interface of RJ45 while the other port having a 15-pin sub-D connector, both supporting RS232 and RS485 communication standards. It also has a tertiary RS485 port which is situated on the power supply. All these ports allow download, upload of user program, perform commissioning tasks and fine tuning of the program. These ports operate independently and may be configured for simultaneous operation to accommodate other data exchange functions such as communication with visualization components. Other communication protocols supported by the IC693CPU363 are Ethernet, FIP, Profibus, GBC, GCM, GCM+ option modules.
The IC693CPU363 is a single slot module. It is capable of handling up to Eight (8) baseplates, including the local baseplate to which the IC693CPU363 is installed. Up to Seven (7) remote or distributed I/O is supported by the IC693CPU363.
IC693CPU363
Three built-in serial ports are available on the IC693CPU363 CPU module. The serial port that is accessible through the power supply connector supports both SNP/SNPX slave protocols. This serial port has a 15-pin D-type female connector which can be accessed by opening the hinged door on the right front of the power supply. This serial port can be used for connecting to a PC that is running programming software or a GE Fanuc hand-held programmer. Serial Ports 1 and 2 support the SNP/SNPX master/slave and RTU slave protocols. Optional Ethernet and Profibus communication modules are available and can be used with the IC693CPU363 CPU module. The IC693CPU363 module supports the periodic subroutine feature. In addition to the user RAM, the IC693CPU363 CPU module also supports Flash memory which is used for storing the CPU firmware. With firmware Release 9.0, the module also supports floating point math.
The GE Fanuc IC693CPU363 is a Module of GE Fanuc series 90-30 PLC systems. It connects to one of the CPU slots on a baseplate. This CPU is of type 80386X and has a speed of 25Mz. It gives the baseplate the ability to connect to up to seven remote or expansion baseplates. The power required for it to work is +5VDC and 890mA current. It has a battery to back up a clock and can be overridden. When it operates, its temperature can vary from 0 to 60 degrees in ambient mode.
GE Fanuc IC693CPU363 module has three ports. The first port supports SNP or SNPX slave on the power connector. The two other ports support SNP or SNPX master and slave, and RTU slave. It is also compatible with RTU master and CCM Modules. To support RTU master, a PCM module is needed. Connectivity is also provided by a LAN port that supports FIP, Profibus, GBC, GCM, and GCM+ modules. It also supports multidrop.
The total user memory of the GE Fanuc IC693CPU363 module is 240 kilobytes and the typical scan rate of 1 kilobyte of logic is 0.22 milliseconds. It has 2048 input (%I) and 2048 output (%Q) points. The discrete global memory (%G) of the CPU is 1280 bits. Internal Coils (%M) take a space of 4096 bits and Output or temporary Coils (%T) deploy 256 bits. System Status Referenced (%S) use 128 bits.
The Register Memory (%R) can be configured with either Logicmaster or Control v2.2. Logicmaster configures the GE Fanuc IC693CPU363 Module memory in 128 word increments up to 16,384 words. Control v2.2 can do the same configuration deploying up to 32,640 words. Analog inputs (%AI) and outputs (%Q) can be configured exactly like the Register Memory using the same programs. GE Fanuc IC693CPU363 has system registers that consist of 28 words.
Please contact Sunny sales@xiongbagk.cn for the best price.
➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com
