中文版
Description
The IC693CPU364 is a single-slot Central Processing Unit (from the GE Fanuc Series 90-30) with an embedded Ethernet cord and 1 built-in serial port. This unit is the “brains” of the PLC and is where most of the calculations take place. See specifications for this unit on IC693CPU364’s website page. A standard application for IC693CPU364 would be connecting a computer’s 9-pin serial port via IC693CBL316 to IC693CPU364’s standard Ethernet interface. It should be noted that IC693CPU364’s Ethernet interface is Ethernet Global Data (EGD). The benefit of this built in Ethernet interface is that you do not need to use a separate Ethernet module such as CMM321 with the unit. You can, in fact, save a PLC slot based on the built in nature of an Ethernet port on IC693CPU364.
The EGD also allows CPU364 to handle specialized parameters which HHP’s configuration mode is not able to do. Unlike CMM321, CPU364 does not require an external transceiver. CPU364 has a built in transceiver that can be connected to via the 10BASE-T port. CPU364 does offer some added functionality in the ability to add an external transceiver as well though. This can be done via the AAUI port which bypasses the internal transceiver. Another benefit of the built in Ethernet interface is that it can communicate without using the PLC backplane, creating faster communications speed than could be achieved with separate CPU and Ethernet modules. Some basic things to note regarding IC693CPU364 are that when using CPU364 you must connect to frame ground at the slot where it is installed. You can find a grounding wire on the unit for this very use.
IC693CPU364
CPU364 uses flash firmware standard with no EPROM, and no EEPROM. The current rating on IC693CPU364 is 1A and it uses GE Fanuc Fuse 44A725214–001. The maximum CPU capacity for CPU364 is 25 MHz utilizing the 80386EX processor. There are 2048 input points, 2048 output points. Register memory is configurable from 128 to 32640 words. CPU364 has firmware-based floating point math.
The IC693CPU364 is a Controller module from the Series 90-30 product family. This controller is manufactured by GE Fanuc automation featuring One (1) Ethernet interface, 240KB user memory, 80386EX processor with processor speed of 25 MHz and typical scan rate of 0.22 ms per 1K of logic for Boolean contacts.
This controller supports up to 2,048 Discrete inputs, 2,048 Discrete outputs, up to1,280 bits of internal discrete global memory, 4096 internal coils, 256 bits of temporary output coils, Configurable Analog Inputs in 128 word increments from 128 to 16,384 words with Logicmaster software and from 128 to 32,640 words with Control version 2.2 and Analog outputs that are configurable in 128 word increments from 128 to 16,384 words using Logicmaster programming software and 128 to 32,640 words when using Control version 2.2.
The IC693CPU364 is generally referred to as CPU 364. It is a single slot width controller module, with processor type of 80386EX and processor speed of 25 MHz while exhibiting a scan rate of 0.22 ms per 1K of logic for Boolean contacts (typical). It has an embedded user memory amounting to 240KB which may be configured depending on the configured %R, %AI, and %AQ variables and registers. It has One (1) Ethernet communication port for programming and communication. This controller may also be communicated through the built-in RS485 communication port that is installed to the power supply located on the left most slot of the baseplate. This controller supports up to Eight (8) baseplate with One (1) baseplate being the CPU baseplate and Seven (7) being the remote I/O baseplates.
Please contact Sunny sales@xiongbagk.cn for the best price.
➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com
