IC694TBB132 GE expansion box terminal panel

IC694TBB132 GE expansion box terminal panel

The IC694TBB132 is a 36-pin, high-density expansion box terminal board for use with 32 input I/O modules in the PACSystem RX3i Programmable Automation Controller (PAC) family and the equivalent family of 90-30 PLC platforms. The strip is currently manufactured by Emerson Automation, which was formerly manufactured by GE Intelligent Platforms (GE IP). The IC694TBB132 has a standard depth output cover and is 23mm or 0.9 in. Terminals are designed to be terminated using #14-26 American Wire Gauge (AWG), solid or stranded copper wire. Length 0.310 inches 7.87 mm stripping end. The bottom of the terminal board is designed as a reference for the recommended cable stripping length. The recommended tightening torque for each connection point is 7 lb. In. To attach the IC694TBB132 box junction box to the lid, align the top of the junction box with the bottom of the lid. Check the notches and grooves on the lid and terminals. These must be aligned to ensure that the terminal board fits perfectly into the module. Once aligned, slide the terminal board upward until you hear a click. If you feel resistance during insertion, do not force the module in, but pull it out and recheck the alignment and possible obstacles before retrying. Once the cover is installed, the component can now be connected to the main module. Align the component with the front panel port of the module. Press the terminal assembly directly into the module until it is in place. Open the front cover and forcefully push back the latch to lock the assembly in place.

Category:

Description

[Product description] :IC694TBB132 GE expansion box terminal panel

Manufacturer : GE

Product model :IC694TBB132

Product type:IC694TBB132 GE expansion box terminal panel

[details] IC755CSS12CDB GE 12.36-inch QuickPanel operation screen

The IC694TBB132 is a 36-pin, high-density expansion box terminal board for use with 32 input I/O modules in the PACSystem RX3i Programmable Automation Controller (PAC) family and the equivalent family of 90-30 PLC platforms. The strip is currently manufactured by Emerson Automation, which was formerly manufactured by GE Intelligent Platforms (GE IP). The IC694TBB132 has a standard depth output cover and is 23mm or 0.9 in. Terminals are designed to be terminated using #14-26 American Wire Gauge (AWG), solid or stranded copper wire. Length 0.310 inches 7.87 mm stripping end. The bottom of the terminal board is designed as a reference for the recommended cable stripping length. The recommended tightening torque for each connection point is 7 lb. In. To attach the IC694TBB132 box junction box to the lid, align the top of the junction box with the bottom of the lid. Check the notches and grooves on the lid and terminals. These must be aligned to ensure that the terminal board fits perfectly into the module. Once aligned, slide the terminal board upward until you hear a click. If you feel resistance during insertion, do not force the module in, but pull it out and recheck the alignment and possible obstacles before retrying. Once the cover is installed, the component can now be connected to the main module. Align the component with the front panel port of the module. Press the terminal assembly directly into the module until it is in place. Open the front cover and forcefully push back the latch to lock the assembly in place.

The IC694TBB132 terminal is a box terminal manufactured by GE Fanuc. This module supports high-density I/O modules. It has 36 pins and is designed for terminating conductor sizes between 14 and 26 AWG. The IC694TBB132 junction box is provided with a screw for secure connection. The junction box is compact in size, 6 inches long and 6 inches wide.

The housing of the IC694TBB132 terminal board is 0.5 “deeper than the inside. This design helps accommodate thickly insulated wires. Terminal screw tightening torque is 7 pounds per inch. The IC694TBB132 terminal board uses the bottom as the specification of the wire. For isolation, the wire should be fully inserted into the junction box. The junction box is easy to install and replace when needed. The harness in the module should be protected at the bottom of the terminal board. When installing a new block, the top and bottom of the cover should be aligned and the notches within the block exactly the same, with cover slots. During removal, the latch should be pushed down until the stop is released.

This article is from the official website of Zhangzhou Branch of Xiamen Xiongba E-commerce Co., LTD. Please attach this link:www.sauldcs.com

[contact information]

Sales Manager: Sunny

QQ:3095989363

Mobile phone/wechat number: +86-18059884797

Email :sales@xiongbagk.cn

[main business] IC694TBB132 GE expansion box terminal panel

AB, ABB, Bentley Nevada, ICS TRIPLEX, Honeywell, Schneider, Bahaman, Triconex, Siemens, Yokogawa Electric, Woodward, Emerson, Ebao, Foxboro, etc. New famous brand DCS system parts, PLC and discontinued parts, a large number of hot inventory advantage and distribution of imported industrial control parts brand, if you want to know the price or other more information, please contact us below.

[catalogue main business]

ABB system spare parts FOXBORO card module MOTOROLA system control module
Allen-Bradley PLC module  GE PLC spare part  NI system module card
ALSTOM control panel HIMA module card PROSOFT Network interface module
AMAT HONEYWELL module card SCHNEIDER CPU module 140 series
B&R module KOLLMORGEN Drives the controller TRICONEX card module
The Bently monitor KUKA robot accessories VMIC series cards
EMERSON System module card METSO spare parts Woodward governor
Enterasys switch MOOG controller amplifier XYCOM cards are on special sale
EPRO probe sensor Moore system module YOKOGAWA security system module
FANUC servo drive module Other card module ICS TRIPLEX module card

 

[available for immediate delivery]IC694TBB132 GE expansion box terminal panel

PM825/3BSE010796R1 BENTLY 3300/50-01-01-00-00 TRICONEX 4000094-316
PM802F/3BDH000002R1 BENTLY 3300/50-01-00-00-00 TRICONEX 4000093-316
PM802F 3BDH000002R1 PM861A BENTLY 3300/50 3300/50-01-01-00-00 TRICONEX 4000103-516
PM632 3BSE005831R1 BENTLY 3300/50 TRICONEX 4000103-520
PM511V08 3BSE011180R1 BENTLY 3300/49532-24-01-05-01-01-01-01-01 TRICONEX 9853-610
PM511V08 BENTLY 3300/48-03-02-01-00 TRICONEX 9674-810
PM510V16 3BSE008358R1 BENTLY 3300/48-01-01-01-00 TRICONEX 9662-810
AB DCP10 BENTLY 3300/48 TRICONEX 40113-02
ABB DC532 BENTLY 3300/47-09-04-02-00 4000636 F 267
ABB HC800 BENTLY 3300/47 7400195-210
GJR5253000R4270 07KT97H3 BENTLY 3300/46-XX-03-01-00 TRICONEX 9513-XX
GJR5251600R4202 BENTLY 3300/46-46-04-02-01 TRICONEX 9563-810
GJR5250000R0303 BENTLY 3300/463300/46-46-04-02-01 TRICONEX 4351A
3BSE020508R1 BENTLY 3300/46-05-02-01-00 TRICONEX AI3351
3BSE018741R30 BENTLY 3300/46 3300/46-46-04-02-01 TRICONEX 3721
3BSE013250R1 BENTLY 3300/46 TRICONEX 4119A

[Disclaimer]

Zhangzhou Branch of Xiamen Xiongba E-commerce Co., LTD. We sell new products and discontinued products, independent channels to buy such special products. Xiamen Xiongba Electronic Commerce Co., LTD. Zhangzhou Branch is not an authorized distributor, distributor or representative of the featured products on this website. All product names/product images, trademarks, brands and logos used on this website are the property of their respective owners. Descriptions, descriptions or sales of products bearing these names, images, trademarks, brands and logos are for identification purposes only and do not imply any association or authorization with any rights holder.

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com