IS200TPROH1BCB GE Redundant processor

The IC698CPE040 is a 1.8 MHz Central Processing Unit manufactured by GE Fanuc for the RX7i series. T

he IC698CPE040 features a Pentium-M microprocessor loaded with 64 MB of user memory and 64 MB of user

flash.  Just like any other RX7i CPU, IC698CPE040 is configured to perform real time control of devices, proces

ses, and material handling structures. A rack-mounted backplane facilitates communication between IC698CPE

040, I/O, and smart option modules via the VME64 Standard format. Embedded Ethernet ports facilitate commu

nication between IC698CPE040, the programmer, and different HMI devices.

Add to quote
Category:

Description

The IC695CRU320 is a Redundancy Processor from the PACSystems RX3i product family. This processor is

manufactured by GE Fanuc / Emerson automation that is categorized as Programmable Automation Controllers (PAC).

The IC695CRU320 is especially used in redundant or hot-standby configuration. With this controller configuratio

n, availability is significantly increased. Two (2) controller racks with similar configuration functions as Primary (activ

e) and Secondary (stand-by) rack. When a single rack has failed, primarily due to errors detected by the IC695CRU320 or er

ror of the IC695CRU320 processor itself, active controller duty is automatically transferred to the secondary (stand-by). T

he secondary rack becomes the primary and the failed rack shift to secondary rack. Additionally, manual switchover is possible.

Controller switchover is performed in Maximum of 1 logic scan with minimum switchover time of 3.133 msec. It support

s up to IC695RMX128/228 synchronization links and capable of transferring up to 2Mbytes of data. With the Celeron

M processor with 1GHz processing speed and 64MB user memory, this controller is ideally used in large and comple

x applications with increased level of criticality. Additionally, up to 512 program blocks may be saved to this process

or which each block size may r

each up to 128 KB.

IS200TPROH1BCB

The IC695CRU320 processor is installed to an RX3i backplane, directly to the Peripheral Component Interconnect (PCI) slot. Other module connections to the bus are also through the PCI 2.2 version or higher. This PCI slot enables rapid transfer and sharing of data within the backplane. The IC695CRU320 also supports Series 90-30 I/O modules for phased migration.
The IS200TPROH1BCB PCB is rectangular in shape. The most prominent components on the IS200TPROH1BCB are two (2) terminal blocks and two (2) relays or contactors. The terminal blocks are black and large in size. They are positioned on the left edge of the IS200TPROH1BCB vertically. The relays featured on the IS200TPROH1BCB are paired together vertically in the center of the top of the IS200TPROH1BCB. These relays are mostly red and they have parts on the top that are yellow and black. Right next to these relays on the left side are two (2) red circular MOVs or metal oxide varistors. Several solid yellow capacitors that are small in size are featured throughout the IS200TPROH1BCB mostly on the board’s lower half. The right edge of the IS200TPROH1BCB is lined with three (3) medium sized jack connector ports identified by the names JZ1, JY1, and JX1. Three (3) more of these connector ports which are smaller (about half the size) than the others have been lined up to the left of these other connector ports. The smaller connector ports have been identified by the names JZ5, JY5, and JX5. Three (3) black variable resistors or potentiometers have been situated at the top right of the IS200TPROH1BCB.

The current requirements for the GE Fanuc IC695CRU320 CPU are 1 Amp at 3.3 Volts DC and 1.2 Amps at 5 Volts DC. Two integrated serial ports are available on the module and they support RS-232 and RS-485 communication, respectively. A maximum of 512 program blocks that are configurable wherein up to 128 KB in size per block are supported. The rated flash memory endurance rating is 100,000 write/erase cycles at a minimum. The switchover time is 3.133 milliseconds at a minimum and 1 logic scan at maximum. The maximum amount of data that can be in transfer at a time is up to 2 MB. The IC695CRU320 CPU supports up to two IC695RMX128/228 synchronization links for redundancy. The programming of the IC695CRU320 CPU can be done in the ladder, C, and function block diagram languages. Ethernet communication is supported through the rack-based Ethernet communication module.

GE VMIVME-017614-132 GE SR469-P5-HI-A20-E GE D20ME
GE 350-017614-132D GE IS200WETBH1ABA GE GE V7768 – 320000
GE IS220PAICH2A GE SR750-P5-G5-S5-HI-A20-R-T GE IS215VCMIH2CA IS200VCMIH2CAA
GE 336A4940CSP11 GE IS200SRTDH2ACB GE 469-P5-HI-A20-E-H
GE IS220PDIAH1A GE IS220PAICH2A GE GE  IC698CPE020-JX
GE 336A4940CSP1 GE 336A4940CSP11 GE VMIVME-7750
GE IS220PDOAH1A GE IS220PDIAH1A GE GE IS200SPROH1AAB MRP663860
GE 3364940CSP2 GE 336A4940CSP1 GE GE IS200TSVCH2ADC MRP061873
GE V7768-320001 GE IS220PDOAH1A GE GE IS200TSVCH2AED MRP246517
GE 350-9301007768-320001C GE 3364940CSP2 GE GE IS210BPPBH2CAA
GE IS215VCMIH2BB GE IS220PRTDH1BC GE 20836416
GE IS200VCMIH2BCC GE 336A5026ADP13 GE ESM10A
GE IS215VCMIH2CA GE IS230SNRTH2A GE ESP10B
GE IS200VCMIH2CAA GE VMIVME5565 GE HWA143-TDM-PMC-V20
GE IS220PVIBH1A GE VMIVME-2128 GE ITM11A8XJ036645
GE 336A4940CSP16 GE VMIVME-4140 GE VG5SK8I052311 PM0N2000
GE IS420UCSBH1A GE VMIVME-7455 GE MIC
GE IS420UCSCH2A-C-V0.1-A GE GE  IC695CRU320CA-EL GE 10BASE-T
GE VMIVME-7750 GE IC698CMX016-ED VMIVME-5567-000 350-005567-000 E GE DL-1200

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com

Related products