IS420ESWBH5A GE Single mode fiber interface

Manufacturer GE Energy
Weight 1lbs 8oz
Product Type Mark VIe IONet Switch
Part Number IS420ESWBH5A
Operating Vibration 1.0 G Horizontal, 0.5 G Vertical
Operating Temperature -40 to +158 °F
Absolute Max Current < 1.0 A
Input Voltage 28 VDC
Functional Abbreviation ESWB
Fiber Ports 2, 100Base-LX10 Single-Mode Fiber Ports
Dimensions H 18.8 cm x W 8.6 cm x D 5.6 cm
Conformal Coating Resistant to Corrosion

Category:

Description

Manufacturer GE Energy
Weight 1lbs 8oz
Product Type Mark VIe IONet Switch
Part Number IS420ESWBH5A
Operating Vibration 1.0 G Horizontal, 0.5 G Vertical
Operating Temperature -40 to +158 °F
Absolute Max Current < 1.0 A
Input Voltage 28 VDC
Functional Abbreviation ESWB
Fiber Ports 2, 100Base-LX10 Single-Mode Fiber Ports
Dimensions H 18.8 cm x W 8.6 cm x D 5.6 cm
Conformal Coating Resistant to Corrosion

The IS420ESWBH5A IONet Switch is the fifth and final version of the ESWB hardware. This switch is the same as the previous models except for its fiber ports, this switch has two fiber ports. The two fiber ports on this switch are 100Base-LX10 single-mode fiber ports with LC-type connection; please note that as these ports are single-mode fiber ports an additional single-mode transducer is required; the part number for this transducer is 65G2100–008 which is manufactured by General Electric.

The operation for this pack is mainly centered on the ability to buffer packets. The IS420ESWBH5A pack is considered a level-one Ethernet switch and will have a continuous stream of multicast and/or broadcast packets that will buffer incoming streams and send them out upon complete reception. Please note that when multiple streams are coming in only one stream can be relieved at a time, all of the remaining streams will have to be buffered at a later time.

This switch has the ability to be mounted in multiple locations, hazardous and non-hazardous alike as well as in two different orientations. The hazardous locations for the IS420ESWBH5A switch are class one, division two; class two, zone two, and ATEX. The switch will be DIN-rail mounted and positioned on the long edge of the switch either parallel or perpendicular to the rail. When parallel mounted a 259B2451BVP1 clip is required. If this switch is replacing another in a third-party situation the switch can be panel mounted, panel mounting will use the screws that were used with the previous part.

GE IS200TREGH1BEC GE DS200CPCAG1ABB GE IS215ACLEH1BB
GE IS200TRPAH2AHE GE DS200CTBAG1ADD GE IS215UCVEH2AB
GE IS200TSVCH1AJE GE DS200DCFBG1 BGB GE IS215UCVEH2AE
GE IS200TTURH1CFD GE DS200DCFBG1BLC GE IS215UCVEM10A
GE IS200TVBAH2ACC GE DS200DMCBG1AED GE IS215VPROH1BD
GE IS200TVIBH2BBB GE DS200DMCBG1AKG GE IS220PAICH1A
GE IS200VAICH1DAB GE DS200DPCBG1AAA GE IS220PAICH2A
GE IS200VCRCH1B GE DS200DSPCH1ADA GE IS220PAOCH1A
GE IS200VRTDH1D GE DS200FGPAG1AHD GE IS220PDOAH1A
GE IS200VTCCH1CBB GE DS200FSAAG2ABA GE IS220PPDAH1B

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com