IS420UCSCH1C GE One of the UCSC controllers

Weight approx. 46.8 oz
Storage Temperature -40 to 85°C
Series Mark VIe
Memory Type 4 GB DDR3-1333 SDRAM
Input Voltage min. 18 VDC to max. 30 VDC
Functional Abbreviation UCSC
Dimensions H 6.61 in x D 5.90 in x W 2.17 in
Cooling Method Convection Cooled

Category:

Description

General Electric Quad Core Mark VIe Controller IS420UCSCH1C is one of three UCSC controllers that have 4 GB DDR3-1333 SDRAM memory with six Ethernet ports. This controller supports embedded PPNG, EFA, and embedded EtherCAT functionalities.
Weight approx. 46.8 oz
Storage Temperature -40 to 85°C
Series Mark VIe
Memory Type 4 GB DDR3-1333 SDRAM
Input Voltage min. 18 VDC to max. 30 VDC
Functional Abbreviation UCSC
Dimensions H 6.61 in x D 5.90 in x W 2.17 in
Cooling Method Convection Cooled
Mark VIe Controller IS420UCSCH1C is a quad-core controller that operates on 1.2 GHz AMD G-Series. This controller was manufactured by General Electric. As a quad-core controller, this device is equipped with a QNX Neutrino real-time hypervisor multi-tasking OS (operating system) that can run high-speed and high-reliability industrial applications. This controller is loaded with model-specific software depending on the type of application used. This device is a BoP (balance of plant) controller and will run the firmware and applications of the Mark VIe series utilizing IONet Interfaces. The IONet interface is notated as a special-purpose private Ethernet interface that will only support Mark control I/O controllers and packs.

Many, if not all of the remaining controllers not labeled as UCSC controllers use I/O on a backplane, the IS420UCSCH1C controller does not use this type of application and does not have the ability to host any I/O application. If this controller is being used in a redundant set all of the attached I/O networks will send input data to all of the attached controllers. The software and hardware on this controller have the ability to guarantee that if the controller has been shut down for maintenance or repair no single point of application input will be lost.

There are requirements needed when the IS420UCSCH1C controller is being mounted. When mounting the controller ensure that it is being directly mounted to the chosen mounting base using the two mounting screws, please note that a minimum of four inches for airflow is required above and below the UCSC.

GE IS200VTCCH1CBB GE DS200FSAAG2ABA GE IS220PPDAH1B
GE IS200VTURH2BAC GE DS200IIBDG1A GE IS220PPRFH1A
GE IS200WETBH1ABA GE DS200IQXSG1AAA GE DS200L DCCH1AGA
GE IS200WNPSH1ABA GE DS200KL DBG1ABC GE DS200L DCCH1ANA
GE VMIVME-7750 GE IS200SRTDH2ACB GE DS200SDCCG1AEC
GE VMIVME-7750-734001 GE IS220PAICH2A GE DS200SDCCG1AFD
GE 350-027750-734001K GE 336A4940CSP11 GE DS200SDCCG1AGD
GE VMIACC-5595-208 GE IS220PDIAH1A GE DS200SDCCG5AHD
GE 350-805595-208J GE 336A4940CSP1 GE DS200SDCIG1ABA
GE RS-FS-9001 GE IS220PDOAH1A GE DS200SDCIG2AEB
GE 362A1052P404 GE 3364940CSP2 GE DS200SDCIG2AHB
GE VMICVMIVME-7740-850 GE IS220PRTDH1BC GE DS200SIOBH1AAA
GE 350-007740-850L GE 336A5026ADP13 GE IS220PAICH2A
GE 04220FL11232A GE IS230SNRTH2A GE IS200EGPAG1BCA
GE H201Ti GE IS200WETBH1ABA GE IS200EPSMG1AED
GE IS220UCSAH1A GE SR750-P5-G5-S5-HI-A20-R-T GE IS200ERIOH1AAA
GE H201Ci-1 GE IS200SRTDH2ACB GE IS200HSL AH2ADE
GE UR6CH GE IS220YDIAS1A GE GE  IC698CPE020-JX
GE UR6TH GE DS200L DCCH1ANA GE VMIVME-7750
GE UR6UH GE IS230SNIDH1A GE GE IS200SPROH1AAB MRP663860
GE UR8LH GE IS230SNRTH2A GE GE IS200TSVCH2ADC MRP061873
GE UR8NH GE IS230SRTDH2A GE GE IS200TSVCH2AED MRP246517
GE UR9EH GE IS230STAOH2A GE GE IS210BPPBH2CAA
GE URRHH GE IS230TBAIH2C GE 20836416
GE IC695CPE310-ABAB GE IS230TCISH6C GE ESM10A
GE IS215UCVHM06A GE IS230TDBTH6A GE ESP10B

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com