Product Description:

The CE03550 is a servo motor drive amplifier designed by Kollmorgen to enhance industrial production through precise motion control in industrial servo systems. This drive amplifier is a step above the convection amplifiers used in industrial servo systems. It features new DSP control technology, additional input and output interfaces and a low-cost topology for resolver conversion. The CE03550 Servo Motor Drive Controller features a display unit for conveying information related to the controller’s power status, communication errors, and general operating status. This display unit is very important as it helps the operator understand what is happening inside the amplifier enclosure without opening the unit.

Our company is mainly engaged in the import of industrial control spare parts. We have most of the industrial control spare parts in stock. Due to the variety of models, we cannot upload the physical pictures one by one!

If the model you need cannot be found in our store, please feel free to consult.Contact: Sunny

Contact number/whatapp: +86 18059884797

QQ: 3095989363

E-mail: sales@xiongbagk.cn

The CE03550 motor drive amplifier is designed to international quality standards; therefore, it operates at approximately 95% efficiency and can maintain this high efficiency for more than five years without any major mechanical failure. In order to prevent electrical accidents caused by the leakage current generated by the CE03550 power amplifier during operation, all parts of the power amplifier must be reliably grounded. The amplifier requires an input voltage between 110 and 230 amps for optimum operation and a line frequency between 47 and 63 degrees Celsius.

Control, installation, and configuration of the CE03550 drive controller should be performed by a trained operator according to the instructions in the amplifier documentation; this is important to prevent unintended motor movement that may result from misconfiguration and wiring practices. The operating environment temperature of the industrial controller should be between 0 and 40 degrees Celsius.