SERVOSTAR TM346 S300 Series digital brushless servo drives

S300 Series digital brushless servo drives are compact, easy-to-use and extremely versatile. The small

footprint saves space in the switchgear cabinet, and with its wide-ranging connectivity options the S300 may be the only drive family you need.

The servo amplifiers are components which are built into electrical equipment or machines,
and can only be used as integral components of such equipment.
The manufacturer of the machine must generate a risk assessment for the machine, and take
appropriate measures to ensure that unforeseen movements cannot cause injury or damage to
any person or property.
The SERVOSTAR 600 family of servo amplifiers (overvoltage category III acc. to EN
61800-5-1) can be connected directly to symmetrically earthed (grounded) three-phase industrial

mains supply networks [TN-system, TT-system with earthed (grounded) neutral point, not
more than 42,000 rms symmetrical amperes, 480VAC maximum].
Connection to different mains supply networks (with additional isolating transformer) p.46.
Periodic overvoltages between outer conductor (L1, L2, L3) and housing of the servo amplifier
may not exceed 1000V (peak value).
Transient overvoltages (< 50µs) between the outer conductors may not exceed 1000V.
Transient overvoltages (< 50µs) between outer conductors and housing may not exceed
2000V.

SERVOSTAR TM346

If the servo amplifiers are used in residential areas, or in business or commercial premises,
then additional filter measures must be implemented by the user.
The SERVOSTAR 600 family of servo amplifiers is only intended to drive specific brushless
synchronous servomotors, with closed-loop control of torque, speed and/or position. The rated
voltage of the motors must be at least as high as the DC bus link voltage of the servo amplifier.
The servo amplifiers may only be operated in a closed switchgear cabinet, taking into account
the ambient conditions defined on page 22 and the dimensions shown on page 34. Ventilation
or cooling may be necessary to prevent enclosure ambient from exceeding 45°C (113°F).
Use only copper wire. Wire size may be determined from EN 60204 (or table 310-16 of the
NEC 60°C or 75°C column for AWG size).
SERVOSTAR 600 does not have any safety functionality according to IEC 61800-5-2. The optional

restart lock function -AS- cannot be compared to the safety function STO. The described
function -AS- is proofen according to EN 954-1. This standard is not listed in the EC Machine
Directive 2006/42/EG since 31.12.2012. The requirements for a restart lock according to EN
954-1 are nevertheless fulfilled
Consider the specifications on page 92 when you use the restart lock option -AS-.