SV1-10483156 Servo valve

The SV1-10 servo valve has only a few moving parts: a shaft supported by a pair of

needle roller bearings and aligned by a pre-clamped spring, on which an electromagnetically

driven rotor and turntable are installed; The driving part of the outer magnetic circuit is installed

in the aluminum shell. A hole is drilled in the end face of the shell, and a rotating shaft with positioning

claw is installed in the hole. The zero position of the rotating disk can be changed by rotating the shaft with a screwdriver

Add to quote
Category:

Description

The SV1-10 servo valve has only a few moving parts: a shaft supported by a pair of needle roller

bearings and aligned by a pre-clamped spring, on which an electromagnetically driven rotor and turntable

are installed; The driving part of the outer magnetic circuit is installed in the aluminum shell. A hole is

drilled in the end face of the shell, and a rotating shaft with positioning claw is installed in the hole.

SV1-10483156

The zero position of the rotating disk can be changed by rotating the shaft with a screwdriver
The clearance of the EMG service valve is nearly 10 times higher than the normal value. The oil

flushes the impurities into the return oil chamber and into the tank, where the vibration signal can

be felt again with a screwdriver. Retighten the cleaning bolt (tightening force approx. 80nm) to

ensure that the leakage gap is set in the factory. If the shaking signal is always felt when tightening,

it indicates that the turntable is not blocked by large particles

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com

Related products