SST-PB3-CLX-RLL

The SST-PB3-CLX-RLL module is a chassis module which is widely used in conjunction with the ControlLogix series by Allen-Bradley. This chassis module has been designed and manufactured by Molex. For communication, this module is equipped with the PROFIBUS D-sub female module with 9 pins. The SST-PB3-CLX-RLL module weighs 430 Grams. This module is a PROFIBUS scanner for the Allen-Bradley 1756 backplane system and the Honeywell PlantScape system. It helps to enable the communication link between a CLX processor and a remote I/O device which lies on a PROFIBUS network. The module can be configured and programmed by using the SST PROFIBUS configuration tool. This tool helps to configure the I/O on the network. The input and output data are mapped into the ControlLogix 5550 Controller’s I/O data arrays. It also displays the connection status and any faults that may occur during the normal operation of the module. Below the LCD panel are 3 LED indicators which display the COMM, SYS, and OK status of the module. The COMM LED indicates the network health status, SYS LED indicates the health status of the PROFIBUS master, and it also scans all the slave units in RUN mode, and the OK LED indicates if the initialization of the module is complete and the module is ready to operate or not. The SST-PB3-CLX-RLL module has an operating temperature range between 0 and 60 degrees Celsius.