RELIANCE 57045 Spare parts module Ryan spot negotiated price
Main characteristics
Heavy overload capacity
This series of converters uses heavy-duty configuration and design, with up to 2x pass
Load capacity, especially can output high torque at low speed, fully meet the mine lift
Requirements for starting torque by helicopter
Full power feedback function
This series of inverter adopts 100% power PWM controlled rectifier, inverter
The feedback power is the same as the output power, and the braking torque reaches the motor
200% of the rated torque. When needed, can quickly brake the winch, the deadline
Degree guarantee system
High power factor
The input side of this series of frequency conversion adopts controllable rectifier, and the power factor can be reached
0.99, does not affect the normal operation of other devices on the same power grid

This module has a 500-volt RMS isolation. It has a 24-bit counter and a comparator and a 100kHz maximum input frequency. It does not have any onboard jumpers. It has an input voltage of 5 V to 12VDC. It has a 16-bit 2kHz internal timer. This module has a total of eight registers that are accessible by AutoMax program tasks. They have the ability to be written to or read from program tasks.

This system has several LED indicator lights. They are labeled CCLK OK, REVERSE, FORWARD, LATCH, CLEAR, and COUNT STOP. This module plugs into the backplane on the AutoMax storage rack using the female card slots. The module can then be secured into place using the rack and faceplate brackets and two screws.