8200-1311 505XT digital controller for steam turbine

Some of these devices CAN communicate with each other via a digital communication link (Ethernet or CAN, depending on the product)
505XT for connection. Through this link, the 505XT display will allow the user to monitor the Xu from this external device
Multi-signal and status leds. In many cases, these connections allow 505XT to receive the required input signal,
Examples include KW load signals or synchronization or load distribution bias signals. This eliminates wiring these signals to typical
I/O channels are required, or digital signals can be used as redundant/backup signals for hardwired signals.
Devices supported within 505XT control applications will be identified with the “Woodward Link” identifier
All devices covered in this section are manufactured or supported by Woodward. Peripherals made by other companies can
Use with 505XT to perform the following functions, however, they should be confirmed before system operation
505XT and application compatibility.

8200-1302

To enter the Woodward link function, select the selection box on the screen above and enter the slave station address and DSLC-2
IP address of the device. The figure above shows the factory default IP addresses of DSLC-2 and 505XT Ethernet port 3
Address. Once 505XT Ethernet port 3 and DSLC-2 network B port between using an RJ45 cable
These Settings will allow the two products to communicate automatically.
Once this configuration is complete, the DSLC-2 can provide synchronization speed bias signals and synchronization/load sharing bias signals
And the generator’s KW output. A radio button on the screen allows the user to select the desired feature. Through this chain
The road estimated KW can be used as an auxiliary KW input signal and is an analog input configured for the KW input
Passage.