1734-IB8S  POINT I/O Guard I/O Safety Module 

The 1734-IB8S is an Allen-Bradley manufactured module used in applications with Safety Instrumentation Level (SIL)

requirements. This module is a POINT Guard IO Safety module with Eight (8) Current Sinking Input Channel

and Four (4) pulse Current Sourcing Pulse Test Outputs.

This module is typically used in applications that perform safety applications such as Emergency Stop Push Button,

Gate Switches, Light Curtains and other safety devices may be connected to this module. It features a channel with

Dual-channel mode capability for evaluating consistency of Two (2) input signals which enables the module to be used in applications that with Safety Category 3 and 4.

The 1734-IB8S may also be used in Single-Channel mode. This mode evaluates single signal which then allows the module to be used in application with Safety Category 2.

1734-IB8S

It has a configurable discrepancy time, that is used to determine the acceptable discrepant time between 2

channels before a fault is declared by the module. It also has an external wiring short check that is enables when

input channels are wired in combination with test outputs. Each channel of this safety module has individually

adjustable ON and OFF signal delay which is used to prevent false positive and false negative readings caused by signal fluctuation.

The 1734-IB8S has a maximum thermal dissipation of 11.62 BTU/hour and it weighs 62.4 grams or 2.2 ounces.

It has a nominal input voltage of 24 Volts DC, an input current maximum of 175 mA, and a 3.4 W maximum power

dissipation. The 1734-IB8S works with SmartGuard, GuardLogix, and Compact GuardLogix controllers and

it is used in POINT I/O platforms to administer CIP safety protocol extensions. The 1734-IB8S operates at 19.2 to

28.8 Volts DC. It also has a maximum power bus current (no load) of 25 mA, and a continuous isolation voltage of 50 Volts.