The I/O board DS200TCDAH1BGD

The Speedtronic Mark V gas turbine control system is one of the most mature derivatives of the Speedtronic family. The Mark V system is designed to meet all gas turbine control requirements. The Mark V control board and control card part numbers belong to the DS200 series. The Mark V turbine control system uses a

DS200TCDAH1B I/O module

The GE digital I/O board DS200TCDAH1B has a microprocessor and several programmable read-only memory (PROM) modules. It also contains 1 10-LED block and 2 50-pin connectors. The GE digital I/O board DS200TCDAGH1B is also fitted with 8 jumpers and 1 LED visible from the side of the board. The GE digital I/O board DS200TCDAH1B also

DS200TCDAG2B Digital I/O board

GE digital I/O board DS200TCDAG2B has a microprocessor and several programmable read-only memory (PROM) modules. It also contains 1 10-LED block and 2 50-pin connectors. The GE digital I/O board DS200TCDAG2B is also fitted with eight jumpers and one LED visible from the side of the board. The 50-pin connector on the GE digital I/O

DS200TCDAG1BDB Digital I/O board

The DS200TCDAG1BDB Mark V Speedtronic board is used as a digital I/O circuit board. The Mark V is one of several turbine control systems created by GE under the Speedtronic umbrella. These systems are designed to provide reliable management and control of industrial gas and steam turbine systems. The DS200TCDAG1BDB is used as the interface

DS200TCDAG1BCB Digital I/O PCB

The DS200TCDAG1BCB works within the Mark V's <r1> core.</r1> It is designed to connect to and work with boards such as STCA, UCPB, TCQA, TCQE and TCEA. If you also need any of these components, please search our inventory for these options. The DS200TCDAG1BCB board has multiple jumpers and can be used for hardware configuration.

DS200TCDAG1B Digital I/O card

GE digital I/O board DS200TCDAG1B has a microprocessor and several programmable read-only memory (PROM) modules. It also contains 1 10-LED block and 2 50-pin connectors. The GE digital I/O board DS200TCDAG1B is also fitted with eight jumpers and one LED visible from the side of the board. The 50-pin connector carries the signals the circuit

DS200TCDAG1BDB MARK V Digital I/O board

The Speedtronic Mark V gas turbine control system is one of the most mature derivatives of the Speedtronic family. The DS200TCDAG1BDB Mark V system is designed to meet all gas turbine control requirements. The Mark V control board and control card part numbers belong to the DS200 series. The Mark V turbine control system uses

DS200TCDAG2B Digital I/O board

GE digital I/O board DS200TCDAG2B has a microprocessor and several programmable read-only memory (PROM) modules. It also contains 1 10-LED block and 2 50-pin connectors. The GE digital I/O board DS200TCDAG2B is also fitted with eight jumpers and one LED visible from the side of the board. The 50-pin connector on the GE digital I/O

DS200TCDAG1BCB Mark V Digital I/O card

DS200TCDAG1BCB's Mark V Speedtronic board is used as a digital I/O circuit board. The Mark V is one of several turbine control systems created by GE under the Speedtronic umbrella. These systems are designed to provide reliable management and control of industrial gas and steam turbine systems. The DS200TCDAG1BCB is used as the interface for

DS200TCDAG1B Input/output module

  [caption id="attachment_21152" align="aligncenter" width="550"] DS200TCDAG1B[/caption] The DS200TCDAG1BCB works within the Mark V's <r1> core.</r1> It is designed to connect to and work with boards such as STCA, UCPB, TCQA, TCQE and TCEA. If you also need any of these components, please search our inventory for these options. The DS200TCDAG1BCB board has multiple jumpers and