tropos 2420 Wireless mesh edge node for DIN-rail mounting

Tropos 2420 wireless mesh edge node are used to build field
area networks for automation applications. Incorporating a managed four-port Ethernet
switch, voltage monitoring and contact closure monitoring, they enable cost-effective and highly
secure IP communications.
The Tropos 2420 includes powerful features such as 300 Mbps wireless data rate at both 2.4 GHz and 5 GHz, access to 653 MHz of
radio frequency (RF) spectrum (463 MHz in ETSI) and an integrated four-port Ethernet switch. It is built for utility, oil and gas, mining
and industrial applications that monitor and control field automation endpoints such as intelligent electrical devices, industrial process
controllers and SCADA devices. Ethernet and serial interfaces supporting DNP3 and Modbus provide future-proof operation to
new and legacy devices. An integrated firewall and VPN provide enterprise class security. These enterprise security features extend
to the wired Ethernet and serial ports as well as to the dual-radio wireless interface. The Tropos 2420 extends the functionality of
Tropos mesh networks to devices where installation of standalone Tropos routers is impractical. An integrated GPS receiver greatly
simplifies installation, commissioning and asset tracking.

tropos 2420

Interfaces
– Full 802.11a/b/g/n wireless, 802.11n client
– compatibility
– Serial: RS-232 and RS-485
– Four IEEE 802.3u autosensing 10/100BASE-T
– Ethernet ports
– Protocols: DNP3, Modbus (RTU), Modbus (ASCII), raw serial
• Two DC voltage monitoring ports (0-50 VDC)
• Two dry contact monitoring ports
• IPv4, IPv6-ready
• 802.1q VLAN support (ESSID and IP based tagging)
• Support for static and dynamic addressing for wireless and wired clients
• IP multicast forwarding, IGMPv3; IGMP proxy
• Automatic rate, power and channel control
• IEC 61850 GOOSE messaging
• Reliable broadcast
Quality of service
• 802.11e WMM
• 802.1p/q with 4 queues per VLAN and ESSID
• 802.1p and DSCP