2090-CSWM1DF-14AA09 2090-Series Single Motor Cables

The cable technology used in single cables is the same regardless of the catalog number. What is different about each cable is the lead preparation
and feedback conductor terminations.
• 2090-CSxM1DF cable conductors have flying-leads and lead preparation that is designed specifically for Kinetix 5500 servo drives. No onsite lead preparation is required.
• 2090-CSxM1DE cables include the 2198-KITCON-DSL connector kit. The kit is pre-assembled with the feedback conductors and lead
preparation for the flying-lead power conductors is designed specifically for Kinetix 5700 servo drives. No on-site lead preparation is
required.
• 2090-CSxM1DG cable conductors have flying-leads and lead preparation that is designed for either Kinetix 5500 or Kinetix 5700 servo
drives. No on-site lead preparation is required, however, 2090-CSxM1DG cable leads are longer than 2090-CSxM1DF cable leads to
accommodate either drive family.

2090-CSWM1DF-14AA09

Catalog numbers consist of various characters, each of which identifies a specific option for that component. Use the
catalog numbering charts below to understand the configuration of your component. For questions regarding product
availability, contact your Allen-Bradley distributor.

These figures illustrate how to measure the bend radius and where cable bends can be made on single motor cables. Use these figures with the cable
pinout and specification tables that follow when routing cables during system installation.

To meet the current requirements of motor brake circuits on Kinetix 5700 servo drive systems with cable lengths that exceed 50 m (164 ft), the
2090-CSBM1DE (series B) cables are available with 18 AWG brake conductors. Series B cables are designed for applications with cable lengths
from 51 m (167 ft)…90 m (294 ft) and are available in 1.0 m (3.3 ft) increments. For Kinetix 5700 drive systems requiring cable lengths from
1.0 m (3.3 ft)…50 m (164 ft), the 2090-CSBM1DE (series A) cables are still available.