177313-01-01 Bently Nevada Vibration monitoring module

Description

Estimated Lead Time : 8 – 12 weeks.

Manufacturer : Bently Nevada

Product No. : 177313-01-01

Product type : Electric Driven TK-3e

Made in U.S.A

Can add on Certificate Of Origin (COO)

Scale Units : 01 = English

Power Cord Type : 01 = American

Power Requirements: Electric = 95-125 Vac, 50/60 Hz, 1A minimum, 190-250 Vac, 50/60 Hz, 1A minimum.

Power requirements : Air = 90 psi (6.2 bar) maximum.

Operational Temperature Range : 0 °C to 54 °C (32 °F to 130 °F)

Storage Temperature Range : -18 °C to 65 °C (0 °F to 150 °F)

Humidity : 95% Non-Condensing Humidity

Exposure : Designed to meet IP54 for dust and water exposure (closed)

Dimensions (HxWxD), approx. : 19.5cm x 29.9cm x 24.8cm

Shipping Weight : 8 Kg

177313-02-02

The Bently Nevada TK-3 Proximity System Test Kit simulates shaft vibration and position for

calibrating Bently Nevada monitors. In addition to verifying the operating condition of monitor

readouts, the TK-3 is also used for both static and dynamic verification of proximity probes.

A properly calibrated system ensures that the transducer inputs and the resulting monitor readings

are accurate.

The system uses a removable spindle micrometer assembly to check the transducer system and position

monitor calibration. This assembly features a universal probe mount that will accommodate probe diameters

from 5 mm to 19 mm (0.197 to 0.75 in). The mount holds the probe while the user moves the target toward or

away from the probe tip in calibrated increments and records the output from the Proximitor Sensor using a

voltmeter. The spindle micrometer assembly also features a convenient magnetic base for ease of use in the

field.

Vibration monitors are calibrated using the motor-driven wobble plate. A swing-arm assembly located over the

wobble plate holds the proximity probe in place. This assembly uses a universal probe mount, identical to that

used with the spindle micrometer assembly. By using the absolute scale factor of the proximity probe in conjunction

with a multimeter, the user adjusts the probe to find a position where the desired amount of mechanical

vibration (as determined by peak-to-peak DC voltage output) is present. No oscilloscope is needed. The user

can then compare a vibration monitor’s reading to the known mechanical vibration signal input viewed by the

proximity probe. The mechanical vibration signal from the TK-3 can range from 50 to 254 μm (2 to 10 mils) peak-to-peak.

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com