8AC110.60-2 ACOPOS plug-in module

Product details:

Material No. :
8AC110.60-2
Description:
Install in the CAN interface of the ACOPOS servo-drive
Used for communication and configuration of ACOPOS servo drivers in standard applications
The node number can be configured on the switch
ACOPOS plug-in module, CAN interface

8AC120.60-1

According to the design, the copying screw 6 can be used with different lead, the larger the lead, the

faster the hydraulic cylinder can be moved within a certain precision range (several hundred ~ thousand mm/s).

When the copying screw uses a small lead, the motion speed of the hydraulic cylinder will be reduced, but the

position accuracy will be very high (micron/step). In a word, the motor will open the valve port for a small

displacement (for example: 5 microns), and the high pressure oil will push the piston to move the corresponding

distance and close the valve port at the same time, and the piston will stop. If this process is circulated 1000 times, the

hydraulic cylinder piston can move 5mm. If it is circulated 1000 times in 1 second, then the hydraulic cylinder will achieve

a speed of 5mm/second. This principle is also often encountered in our daily life, such as the steering hydraulic assist device in the car.