中文版
Description
Manufacturer GE General Electric
Series Mark V
Part Number DS200TCQAG1BHF
Product Type Analog I/O Board
The GE RST Analog I/O Board DS200TCQAG1BHF contains four 34-pin connectors, two 40-pin connectors, and six jumpers. The board also has 6 LEDs. The GE RST Analog I/O Board DS200TCQAG1BHF is designed with 6 holes for installing the board in the board cabinet on the drive. The holes align with matching holes in the board rack and you can attach the board with washers and screws. When you remove the old board, keep the washers and screws together for use when you install the replacement board. Due to the high voltage in the board, it is critical to not let any metal parts fall into the board cabinet. If a screw or washer falls in the cabinet, locate the part and remove it from the drive. It the drive is started with the loose metal still inside, the metal might damage the drive or start a fire or cause a serious electrical shock.
DS200TCQAG1BHF
Some guidelines are available to help prevent the metal screws and washers from dropping in the drive. When you remove the board, use one hand to hold the screwdriver and the other hand to guide the screwdriver to the screw and then to hold the screw when it is removed. To install a screw, use one hand to align the screw in the hole, and with the other hand, turn the screwdriver. Never over tighten the screws because the board might crack or break apart. Instead, only tighten the screw firmly in place. The washer helps protect the board from damage from over tightening.
Frequently Asked Questions about DS200TCQAG1BHF
Is there a manual describing DS200TCQAG1BHF?
Yes, Manual GEH-6353, the Mark V LM Turbine Control Manual describes DS200TCQAG1BHF in section 5-4 of the manual. We currently do not have a specific manual for DS200TCQAG1BHF but we can send you Manual GEH-6353 to help with DS200TCQAG1BHF connections, software, hardware, etc.
Which connector is the data bus between DS200TCQAG1BHF and the STCA?
The Data Bus connector between DS200TCQAG1BHF and the STCA is connector 3PL on DS200TCQAG1BHF. Conditioned signals are carried on 3PL on DS200TCQAG1BHF for transferring to the COREBUS.
What does DS200TCQAG1BHF do?
DS200TCQAG1BHF scales and conditions many of the analog signals read in by terminal boards mounted on I/O cores < R1 >, < R2 >, and < R3 >.
Please contact Sunny sales@xiongbagk.cn for the best price.
➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com
