IC200PWR101D 120/240 volt AC power module

The GE Fanuc IC200PWR101 module is a 120/240 volt AC power module used to power devices

and modules mounted on the backplane of the PLC rack, including the network interface unit, the I/O

unit, and the central processing unit. The module can operate as a primary power supply and a supplementary

power supply. This module can be used as a supplementary power supply if connected to a power booster carrier. The

GE Fanuc IC200PWR101 power supply uses alternating current (AC) as its input power and input voltage, while other

Versamax series power modules primarily use direct current (DC). The unit has a rated input voltage of 120/240 volts

AC and a rated input power of 27 volts amperes. It has an output voltage of 5 volts DC or 3.3 volts DC. It has neither the power

to extend nor the power to isolate. The device has a residence time of about 20 milliseconds.

Versamax IC200PWR101 power module provides overload and short circuit protection. The total

output current of the module should not exceed 1.5 amps. If the output voltage rating is 3.3 volts, the output current

will be 0.25 Amps, while a 5 volt output voltage will produce 1.5 Amps of output current minus 3.3 volts of service current.

It has a frequency range of 47 to 63 Hertz. Jumper installation and voltage range determine the input voltage of the

IC200PWR101 power module. The dimensions (W x H x D) of this power module are 49 mm (1.93 in)x 133.4 mm (5.25 in)x 39 mm (1.54 in).