IC660BBD025 GE Block I/O from the Genius I/O Block series

The IC660BBD025 is a Block I/O from the Genius I/O Block series. This device is mainly used to implement distributed

I/O architecture as the IC660BBD025 is a fully-functional Genius I/O node that comes with Thirty-Two (32) I/O circuits,

a built-in Genius communication terminal, and an integrated Hand Held Monitor (HHM) port. The IC660BBD025 is formerly

produced by GE Fanuc Automation however, the product series and other automation devices have been acquired by

Emerson Automation.

IC660BBD025

This module supports remote installation, near the machine or process being controlled as the IC660BBD025

is capable of communicating with the controller up to 7500 feet away. It can be directly integrated with Series 90-30, Series 90-70

controllers, and other controllers that support the communication protocol as well as Genius Bus Controllers, Interface module, and

3rd party devices. The input circuits of this module accept 10 to 30 VDC range for 12/24 V nominal supply; 4.9 to 5.3 VDC voltage

range for 5 V nominal supply in sink configuration only. Input circuits have selectable filter times of 1, 2, 3, 4, 5, 10, 20, 30, 40, 50, 60,

70, 80, 90, or 100ms and input processing time of 1.4 ms. The output circuits are rated 0.5 Amperes each with a maximum inrush

current of 4 Amperes up to 10 ms. The total output current of this module is 16 Amperes with an individual output delay of 0.5 ms. Status

LED indicators are provided with the IC660BBD025 such as Module OK and I/O Enabled. This module also comes with resettable self-protecting circuits and advanced diagnostics.