IC695CRU320 Redundant CD/EH CPU

IC695CRU320 PACSystems* RX3i Redundant CPU can be used to perform real-time control of machines,

processes, and material handling systems. The CPU uses SNP slave protocols with programmers and

HMI devices through serial ports. It communicates with I/O and smart options through the dual backplane bus provided by the module:
▪ High-speed PCI backplane for fast throughput with new advanced I/O. Serial backplane facilitates migration of existing devices series 90*-30 I/O.

IC695CRU320 Reference table sizes include 32kbit discrete %I and %Q and up to 32K words per analog %AI and %AQ.
▪ Supports most series 90-30 modules and extension racks. For supported I/O lists, communications, motion

modules and smart modules refer to the PACSystemsRX3i System Manual, GFK-2314F or later.
▪ Supports up to 512 blocks. The maximum size block size is 128KB.
▪CPU firmware can be upgraded on-site.
▪ The CPU supports firmware upgrades for its modules.
Two serial ports: an RS-485 serial port and an RS-232 serial port.
▪ Ethernet communication through the rack-based Ethernet interface module (IC695ETM001). For detailed

information on Ethernet features, see the PACSystems RX7i and RX3i TCP/IP Ethernet Communications User Manual, GFK-2224.
▪ Time synchronization to Ethernet SNTP time server when used with Ethernet 5.0 or later.
▪ Complies with EU RoHS Directive 2002/95/EC using the exemptions identified in the following annexes :7(a), 7(c)-I and 7(c) iii.