IS200BPPBH2B GE Secure I/O packet

Description

Part Number IS200BPPBH2B
Series Mark VI IS200
Manufacturer General Electric
Functional Acronym/Abbreviation BPPB
Model Type Safety I/O Pack
Weight Less than 1 pound
The IS200BPPBH2B is designed as a safety I/O pack or auxiliary board. The model was designed to be used in conjunction with a larger circuit board. This is a small board with few components. The board attaches to its motherboard using four standoffs and screw mounts that are inserted into brass-plated factory-drilled holes placed in each corner. It should be noted three of the IS200BPPBH2B board edges are shaped, possibly to allow room for components on the motherboard.

The IS200BPPBH2B has two LED (light-emitting diodes) located along a board edge. The board has two vertical connectors of different sizes and two phone jacks. It also includes an inductor coil, several capacitors, and integrated circuits, and several transistors. One of the chips on the surface of the board is an AMD memory chip. This is located near the center of the board. Components have been marked with reference designators.

There is an operator interface that can be used with the IS210BPPBH2B model, the interface is referred to as an HMI or Human Machine Interface. This interface is designed as a Microsoft Windows NT PC operating system, it can support a graphics display system, client/server capability, a software interface, and a Control System Toolbox used for maintenance. Installation procedures may be found in publications from General Electric referencing part number IS200BPPBH. This includes manuals and data sheets. Please follow all safety recommendations. As the original equipment manufacturer, GE provided all technical support for the IS200BPPBH2B.

Is there an enhancement of the BPPB models?

Yes, the enhancement of the BPPB models is known as the BPPC-based Mark VI packs. The BPPB models were migrated to the BPPC-based I/O packs. It is unknown whether or not the firmware for the BPPC packs is the same as the BPPB packs. The firmware that will be used in conjunction with the BPPC models use is the ControlST V04.04 or later.
What model types or I/O packs can the BPPB model be used in conjunction with?

There are several different model types that the BPPB model can be used in conjunction with. The BPPB model will be used with the PCAAH1A, PCLAH1A, PPRAH1A, PPRAS1A, PPROH1A, PSVOH1A, and PTURH1A models or I/O packs.

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com