中文版
Description
Communication type udh or IONet
Functional abbreviation tnci
Humidity 5-95% non-condensing
Manufacturer ge Industrial Systems, US General Electric Company
Printed circuit board
Redundancy type Simplex, Duplex, and TMR
Series Logo VI
The IS230SNCIH6A board is marketed by General Electric as a printed circuit board. The board can be mounted on a 13 or 21 VME slot rack. When used in simplex architecture type systems, it is usually used with a control module, but if the architecture chosen is triple redundant, it will be used with IONet, the main processor card, and the control module.
TNCI models can use two main types of communication, they are Unit Data Highway, which is a type of Ethernet-based LAN communication, and IONet communication. Note that UDH communication drivers are typically associated with the main processor card located within the Mark VI system.
IS230SNCIH6A
While the IS230SNCIH6A board consists of more than a dozen capacitors, resistors, and many more widgets, the main visual components of the model are two terminal bars, three sub-D pin connectors, two female plug type connectors, and metal oxide varistors, of which there are 25. The two terminal blocks, labeled TB1 and TB2, are located near the bottom edge of the circuit board, and the metal oxide varistor is located directly above the two terminal blocks. Three sub-D pin connectors are located near the top edge of the board, and each pin consists of 37 pins.
As mentioned above, the IS230SNCIH6A model will be used with the control module, but in some cases a backup protection module will also be required.
A major disadvantage of using TNCI boards in Mark VI systems is the lack of information. Due to the lack of information, it can be difficult not only to operate the model, but also to install it
Please contact Sunny sales@xiongbagk.cn for the best price.
➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com
