中文版
Description
General Electric’s Mark VIe Controller IS420UCSBH1A is similar to the UCSC Controller and all of the same general information can be applied to the UCSB model. The IS420UCSBH1A model is typically a compact stand-alone controller used to help with controller logic.
Manufacturer General Electric
Similar To Mark VIe UCSC Controller
Product Type Mark VIe, EX2100e, or LS2100e Controller
Processor Type Intel 600 MHz EP80579
Part/Model Number IS420UCSBH1A
Part Number IS420UCSBH1A
Ambient Temperature Range -22 to 149°F
Functional Acronym / Abbreviation UCSB
Features No Fan, No Battery, Single Module, etc.
Certifications Non-Hazardous, UL E207685 and ATEX Zone 2, Group IIC
The IS420UCSBH1A controller is the first of the UCSB controllers manufactured by General Electric as part of the Mark VIe Control Safety System Series. This controller is similar to the UCSC controller and while it does not have the same hardware the software needed to operate this controller is nearly identical. According to the GEH-6725 Mark VIe and Mark VIeS, Controls Equipment HazLoc Instruction Guide the IS420UCSBH1A controller is labeled as a Mark VIe, LS2100e, and EX2100e controller. There is also a specific microprocessor used with this controller, the microprocessor installed in this device is the 600 MHz EP80579 Intel Processor.
On page twenty-two of the GEH-6725 Instruction Guide, there is a small table that labels the electrical/power supply ratings needed to power the IS420UCSBH1A, the ratings are as follows, a minimum voltage of eighteen direct currents, with a maximum of thirty volts of direct current, the nominal power rating is twenty-four and twenty-eight volts of direct current. The maximum current rating used with this device is 1.5 ADC.
When being mounted there are several certifications that are required to mount the IS420UCSBH1A controller in hazardous and non-hazardous locations alike. For example, when mounted in ATEX Zone 2, Group IIC, the certification needed is UL DEMKO 12 ATEX 1114875X. All certifications regarding the controller being mounted in Class I, Zone 2, Group IIC, non-hazardous, and Class I, Division 2, Groups, A, B, C, and D are the same, the certification requirements for these locations are UL E207685.
Please contact Sunny sales@xiongbagk.cn for the best price.
➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com
