VME-7807RC-410000 350-930078074-410000 E Intel® Pentium® M-Based VME SBC

Description

VME-7807RC-410000 350-930078074-410000 E Intel® Pentium® M-Based VME SBC

Product description

GE Fanuc Embedded Systems’ VMIVME-7807/VME-7807RC are full featured Pentium® M-based, single board computers (SBCs) in a single-slot, passively cooled, VME Eurocard form factor. These products utilize the advanced technology of Intel®’s 855GME chipset.
The 855GME chipset allows the VMIVME-7807/VME-7807RC to provide enhanced features such as integrated video and Ultra ATA/100 IDE support. The VMIVME-7807/VME-7807RC are capable of executing many of today’s desktop operating systems such as Microsoft®’s Windows® XP, Windows 2000 and a wide variety of Linux® based operating systems. The standard desktop features of the VMIVME-7807/VME-7807RC are described in Chapter 2 of this manual.

The VMIVME-7807/VME-7807RC provide features useful to embedded applications such as:
• Three serial ports: COM2, COM3 and COM4 (rear I/O)
• Four USB 2.0 ports (two on front panel and two rear I/O)
• 32KB of nonvolatile RAM
• Remote Ethernet booting
• Up to 2GB of CompactFlash on secondary IDE (optional)
• Software-selectable Watchdog Timer with reset
Additionally, the VMIVME-7807/VME-7807RC offer one PMC expansion site (PCI-X, 66MHz) with front panel access. The VMIVME-7807/VME-7807RC are capable of executing many of today’s operating systems such as VxWorks®, Solaris™ or QNX®.
The embedded features of the VMIVME-7807/VME-7807RC are described in Chapter 3 of this manual.
The VMIVME-7807/VME-7807RC are suitable for use in applications ranging from telecommunications, simulation, instrumentation, industrial control, process control and monitoring, factory automation, automated test systems, data acquisition systems and anywhere that the highest performance processing power in a single VME slot is desired.

VME-7807RC-414001

Product parameter

The VMIVME-7807/VME-7807RC provide features typically found on desktop systems such as:

• 1.0GB DDR SDRAM using one SODIMM and an optional 512MB of solder-in memory for a maximum of 1.5GB
• Built-in SVGA support (front panel connection)
• Digital video controller (rear I/O) DVI-D with dual head display capabilities
• 10/100 Mbit Ethernet controller (front panel connection)
• Dual Gigabit Ethernet supporting (front panel or rear I/O)
• Optional P0 with VITA 31.1 interface
• Serial ATA (SATA) support (rear I/O)
• Serial port COM1 (front panel connection)
• Ultra IDE drive support (rear I/O)
• Real-Time clock/calendar
• Front panel reset switch
• Miniature speaker
• Keyboard/Mouse port (front panel connection)

Application field

The VMIVME-7807/VME-7807RC incorporate the latest Intel chipset technology, the 855GME. This chipset utilizes Advanced Hub Architecture (AHA). The AHA allows for increased system performance by separating many high-bandwidth I/O accesses from PCI accesses, relieving bottlenecks on the PCI bus. Furthermore, the 855GME chipset brings new levels of integration to motherboard chipsets and provides additional features such as Integrated LVDS and Serial ATA.

The VMIVME-7807/VME-7807RC conform to the VME physical specification for a 6U board. The VMIVME-7807/VME-7807RC can be used for system control or as a peripheral board. They can be plugged directly into any standard chassis accepting either type of board.
The following steps describe the GE Fanuc Embedded Systems-recommended method for installation and powerup of the VMIVME-7807/VME-7807RC :
1. If a PMC module is to be used, connect it to the VMIVME-7807/VME-7807RC prior to board installation (as shown in Figure 1-2 on page 29). Refer to the Product Manual for the PMC module for configuration and setup.

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com