F3DIO20/802  HIMatrix Safety-Related Controller

The content of this manual is part of the hardware description of the HlMatrix programmableelectronic system.
This manual is organized in the following main chapters:Introduction
Safety
Product Description
Start-up
Operation
Maintenance
Decommissioning
Transport
Disposal
HlMatrix remote l/Os are available for the programming tools SlLworX and ELOP ll FactoryWhich programming

tool can be used, depends on the processor operating system of theHlMatrix remote l/O, refer to the following table:

All safety information, notes and instructions specified in this document must be strictlyobserved. The product may only

be used if all guidelines and safety instructions are adhered toThis product is operated with SELV or PELV. No imminent

risk results from the product itself.The use in Ex-zone is permitted if additional measures are taken.
Intended Use
HlMatrix components are designed for assembling safety-related controller systems.When using the components in the HlMatrix system, comply with the following generalrequirements.

F3-DIO-208-02

xposing the HlMatrix system to environmental conditions other than those specified in thismanual can cause the HlMatrix system to malfunction.
ESD Protective Measures
Only personnel with knowledge of ESD protective measures may modify or extend the systemor replace devices.

No imminent risk results from a HlMatrix system itselfResidual risk may result from:
Faults related to engineering
Faults related to the user program
Faults related to the wiring
Safety PrecautionsObserve all local safety requirements and use the protective equipment required on site
Emergency Information
A HlMatrix system is a part of the safety equipment of a site. lf a device or a module fails, thesystem enters the safe state.
In case of emergency, no action that may prevent the HlMatrix systems from operating safely ispermitted.