05701-A-0302  Single Channel Control Card Catalytic

• Manufacturer : Honeywell

• Product No. : 05701-A-0302

• Product type : Single Channel Control Card Catalytic

• Four-Part Liquid Display: Analogue Display: 25 segment. Digital Display: Four character.
• Message Display: Four character. Icon Section: Power On/Card Select.

• LEDs: A1, A2, A3 gas alarms. Fault and Inhibit.

• Push-Button: Alarm Reset/Card Select.

• Alarm Setting Point Resolution: In 1% fsd steps.

• Power Consumption: Catalytic: 3.75W (typical). (Includes Catalytic Sensor). 4 – 20mA: 3.25W (typical).

• DC Supply: 18V to 32V dc.

• Electronic Drift: Less than ±2% / 6 months.

• Dimensions (LxWxH) : 17cm x 2.5cm x 11.2cm

• Weight : 0.165 Kg

• Shipping weight : 1.5 Kg

05701-A-0302

The 5701 Single Channel Control Card provides control, display and alarm facilities for a
connected gas detector. The front panel display indicates the gas reading and channel status
while LEDs are used for alarms. A push-button is provided for resetting the alarms and selecting
the card for use with the Engineering Card.
The operation of the control card is microprocessor controlled and is fully definable
for a wide range of connected gas detectors and application requirements. The software
configuration setup is stored in an EEPROM.
There are two types of control card depending on the type of gas detector being fitted to the
system:
a. Single Channel Control Card 4 – 20mA. Part Number 05701-A-0301.
b. Single Channel Control Card Catalytic. Part Number 05701-A-0302.
Each of the above control cards consist of a single channel control card fitted with the
respective plug-in sensor drive module.
An optional Analogue Output Module can also be plugged into the single channel control card
to provide a remote output of the channel card readings.