CC-TAIX51   Analog Input IOTA Models

The Series C Analog Input IOTA board is represented by the following information and graphic.
To access the parts information for the:
• module
• IOTA
• terminal plug-in assembly, and
• fuses
associated with this board and module, refer to Analog Input in the Recommended Spare Parts section.
Series C Analog Input 6 inch, non-redundant IOTA is displayed.

Category:

Description

CC-TAIX51   Analog Input IOTA Models

The Series C Analog Input IOTA board is represented by the following information and graphic.
To access the parts information for the:
• module
• IOTA
• terminal plug-in assembly, and
• fuses
associated with this board and module, refer to Analog Input in the Recommended Spare Parts section.
Series C Analog Input 6 inch, non-redundant IOTA is displayed.

Individual field wiring is protected by an internal protection circuit permitting:
• Short circuit protection of input for field short circuits. Protection suitable for Division 2 non-incendive /
Zone 2 non-arcing.
• Each signal can be shorted in the field with no damage to module or board. Other channels on the same IOM
will not be affected

CC-TAIX51

The AI IOM/IOTA is optimized for use with classic two-wire transmitters. All 16 channels can accept inputs
from two-wire transmitters without any special wiring or jumper options.
The standard usage is to:
• reserve the first 12 channels of the AI IOM/IOTA for classic two-wire transmitters, and
• use the last 4 channels of the IOM/IOTA to interface any of the supported input styles (including two-wire
transmitters).
Depending on the input style applied to channels 13 through 16, you may need to cut jumpers on the IOTA and
apply wiring to the TB2 terminal block on the IOTA. This is discussed in detail in the following sections.

The IOTA is pre-engineered (without custom wiring) to accept sources that are not two-wire transmitters, but
you must use channels 13 through 16.
When sources other than two-wire transmitters are to be interfaced and you have more than 4 per IOTAs, then:
• the first four must be interfaced to channels 13 through 16, and
• the remainder may be able to interface to channels 1 through 12 (depending on input style) but you must
perform some degree of custom wiring.

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com

Reviews

There are no reviews yet.

Be the first to review “CC-TAIX51   Analog Input IOTA Models”

Your email address will not be published. Required fields are marked *

Post comment