C825KN10 200A 600V EATON Contactor

Product details:

In electrical engineering, because C825KN10 200A 600V contactor is a device that can quickly cut off the AC

and DC main circuit and can frequently switch on and off the large current control (up to 800A) circuit, so it is

often used in motor as the control object. It can also be used to control the power load of factory equipment,

electric heater, working mother machine and various power units. The contactor can not only connect and cut off

the circuit, but also has the effect of low voltage release protection. Contactor control capacity is large, suitable for

frequent operation and remote control, is one of the important components in automatic control system.

As a high-power switching device, C825KN10 200A 600V contactor is widely used in aerospace, aviation, weapons,

ships, electronics and other systems and equipment. The load current controlled by C825KN10 is greater than

25A, and the voltage is 25VDC. 115VAC, 402Hz; 386VAC, 50Hz, in the equipment is mainly used as a power

distribution switch for power control or control of high-power motor start-stop control, is a key device in the

equipment, playing an important role. In industrial electricity, contactor models are many, working current in 5A-1000A, its use is quite wide.

The working principle of C825KN10 200A 600V contactor is as follows: when the contactor coil is energized, the

coil current will generate a magnetic field, which makes the static iron core generate electromagnetic suction to

attract the iron core, and drives the AC contactor point action. Normally closed contact is disconnected, and

normally open contact is closed. The two are linked. When the coil is powered off, the electromagnetic suction

disappears, and the armature is released under the action of releasing spring, so that the contact recovers, the

normally open contact breaks, and the normally closed contact closes. A DC contactor works somewhat like a temperature switch.