LNL-1320-S3 Dual Reader Interface (DRI) module

Description

LNL-1320-S3 Dual Reader Interface (DRI) module

LenelS2TM offers a Dual Reader Interface (DRI) module for access control solutions. Most access control card readers,
keypads, or readers with keypads that use standard Wiegand Data1/Data0 or Clock/Data communication are supported,
as are those that support the bidirectional RS-485 Open Supervised Device Protocol (OSDP™). Lock, unlock, and facility
code offline access modes are supported on all readers connected to the DRI. Each DRI supports up to 16 different
card formats as well as issue codes for both magnetic and Wiegand card formats.
The DRI provides a vital link between the Intelligent System
Controller (ISC) and the card reader attached to the interface.
As many as 32 DRI modules can be multidropped using RS485 2-wire communication up to 4,000 feet per port away
from the ISC. Each DRI module is individually addressed for increased reporting capabilities with OnGuard® access
control software applications. The DRI includes eight inputs that support normally open, normally closed, supervised, and
non-supervised circuits. In addition, six output relays support fail-safe or fail-secure operation.

LNL-1320-S3

Features & Functionality
• 12 or 24 VDC power supply
• Supports Data1/Data0, Clock/Data, Supervised and Unsupervised
F2F and OSDP-compatible RS-485 readers and keypads
• Supports Open Supervised Device Protocol (OSDP) readers, including
biometric template transfer and Secure Channel encryption
• Downloadable firmware
• Six Form-C 5 A at 28 VDC relay outputs
• Up to 16 different formats
• Issue code support for magnetic and Wiegand formats
• Door contact supervision (open/closed)
• REX push-button monitor
• Strike control output
• Bicolor reader status LED support and 2-wire LED support
• Beeper control
• Dedicated tamper and power failure circuits
• Support for offline reader access mode
• On-board jumpers for termination
• On-board regulator allows 12 VDC reader support from 24 VDC
power source
• DIP switch-selectable addressing
• Advanced Encryption Standard (AES) 128-bit algorithm for
communications to ISC
• Compatible with current and previous versions of OnGuard
Extended Functionality
• Connect FIPS-201 readers for embedded authentication (when
used with LNL-4420 or LNL-X4420 and appropriate HID® and
OnGuard software and licenses)

Please contact Sunny sales@xiongbagk.cn for the best price.

➱ sales manager: Sunny
➱ email mailto: sales@xiongbagk.cn
➱ Skype/WeChat: 18059884797
➱ phone/Whatsapp: + 86 18059884797
➱ QQ: 3095989363
➱ Website:www.sauldcs.com